On Sun, Nov 16, 2008 at 12:45:12PM -0500, Andrei Tanas wrote:
> > > How did you find out that it's 0x10 instead of 0x06? Has
> > documentation on
> > > ALC1200 become available?
> >
> > It's easy:
> > grep -i -C6 spdif /proc/asound/card0/codec\#0
> > grep -i -C6 'stereo digital' /proc/asound/card0/codec\#0
> >
> > And check the connectivity between pin complex and audio output nodes.
> That's the kind of stuff that would be great to know for somebody who wants
> to troubleshoot something for the first time. Thanks.
You are welcome.
> > Now you can do a 'cat /proc/asound/card0/codec\#1' and read about the
> > HDMI codec. For it to work, you may need the bleeding edge Xorg
> > drivers.
> That will be for somebody else to test I guess, I don't have the hardware -
> it turns out my TV does not take digital audio through its HDMI port.
That's fine.
The G45 HDMI has worked on our boards, so chances are good for others.
> > So let's create a new model?
> I should have gave it a shot myself I guess.
>
> > +#define ALC883_DIGOUT_NID_ASUS_P5Q 0x10
> Why not ALC1200_DIGOUT_NID? Or is it really specific to Asus P5Q?
I'm not really sure, but ALC1200_DIGOUT_NID does look like a better name :-)
> The patch worked perfectly.
Thank you.
Fengguang
---
hda: alc883 model for ASUS P5Q-EM boards
Add a new alc883 model ALC1200_ASUS_P5Q for ASUS P5Q-EM boards.
It is the same as ALC883_6ST_DIG except that the SPDIF digital
output nid is 0x10.
Tested-by: Andrei Tanas <andrei@xxxxxxxx>
Signed-off-by: Wu Fengguang <wfg@xxxxxxxxxxxxxxx>
---
sound/pci/hda/patch_realtek.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- sound-2.6.orig/sound/pci/hda/patch_realtek.c
+++ sound-2.6/sound/pci/hda/patch_realtek.c
@@ -232,6 +232,7 @@ enum {
ALC883_3ST_6ch_INTEL,
ALC888_ASUS_M90V,
ALC888_ASUS_EEE1601,
+ ALC1200_ASUS_P5Q,
ALC883_AUTO,
ALC883_MODEL_LAST,
};
@@ -6868,6 +6869,8 @@ static int patch_alc882(struct hda_codec
#define ALC883_DIGOUT_NID 0x06
#define ALC883_DIGIN_NID 0x0a
+#define ALC1200_DIGOUT_NID 0x10
+
static hda_nid_t alc883_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
@@ -8190,6 +8193,7 @@ static const char *alc883_models[ALC883_
[ALC883_CLEVO_M720] = "clevo-m720",
[ALC883_FUJITSU_PI2515] = "fujitsu-pi2515",
[ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel",
+ [ALC1200_ASUS_P5Q] = "asus-p5q",
[ALC883_AUTO] = "auto",
};
@@ -8208,6 +8212,7 @@ static struct snd_pci_quirk alc883_cfg_t
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q-EM HDMI", ALC1200_ASUS_P5Q),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
@@ -8555,6 +8560,17 @@ static struct alc_config_preset alc883_p
.unsol_event = alc883_eee1601_unsol_event,
.init_hook = alc883_eee1601_inithook,
},
+ [ALC1200_ASUS_P5Q] = {
+ .mixers = { alc883_base_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC1200_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
+ .channel_mode = alc883_sixstack_modes,
+ .input_mux = &alc883_capture_source,
+ },
};
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
