Takashi Iwai wrote:
At Sun, 9 Nov 2008 21:09:29 +0100,
Andreas Mohr wrote:
On Sun, Nov 09, 2008 at 07:58:17PM +0100, Takashi Iwai wrote:
At Sun, 9 Nov 2008 16:13:23 +0100,
Andreas Mohr wrote:
OK, _THIS_ time I actually did get the correct model (last time I tried
modprobe with model=acer-aspire, but apparently it then used the
/etc/modprobe.d/ model=toshiba setting, since this time gamix showed
entirely different controls with i-Mic etc.) - all the more reason to
log the model name chosen/selected by the driver!!
Build with the debug option (why turned off even if you *are*
debugging?). Then the driver will show you details.
Hmm, right, that would have been an (very useful) option, but not for the
majority of users OTOH.
I thought many ditros set this option...
Especially since this is a user-visible module parameter which should thus
be confirmed in mainstream user code, via logging.
You can check via /sys/modules/snd_hda_intel/parameters/model whether
you passed correctly or not, at least :)
Admittedly not many modules log their settings during startup,
but for snd_hda_intel with its two myriads of codec/machine variants
and a resulting quarter myriad of issues that would be very useful.
Passing the model option is already a kind of debugging work, IMO.
You shouldn't do it unless you need it, indeed.
--> I have to admit that usability sucks^Hcould be a lot better.
One would call it rather debuggability than usability.
These are completely different things.
See above ;)
i-Mic on Ekiga with lotsa mixer fiddling didn't work either this time.
OK, then something is missing. But you should test by arecord first
than any complicated applications as a primary test.
Good point, will do.
Oh, and is there a way to manually alter codec registers?
Try hda-verb program. Build your kernel with CONFIG_SND_HDA_HWDEP=y
and access via the hwdep device.
ftp://ftp.suse.com/pub/people/tiwai/misc/hda-verb-0.2.tar.bz2
Takashi
For the reference this this list of nodes on ALC268 (main mobo):
0x01 - params
output streams:
0x02 - DAC1 + volume
0x03 - DAC2 + volume (only headphones)
0x06 - s/pdif-out
0x1D - BEEP
input streams:
0x07 - ADC1
0x23 - ADC1 multiplexer + volume
0x08 - ADC2
0x24 - ADC2 multiplexer + volume
output pins(*): (***)
0x14 - LINE-OUT headphones <- 0x0f - line-out (mixer) <- DAC1 + beep
0x15 - HP-OUT speakers <- 0x10 - hp-out (mixer) <- DAC1 + DAC2 + beep
0x16 - MONO-OUT N/A <- 0x0e - mono out (mixer) <- DAC1
0x1E - spdif
input pins(**):
0x12 - DMIC1/2 N/A
0x13 - DMIC3/4 N/A
0x18 - MIC1 external mic + boost
0x19 - MIC2 internal mic + boost
0x1A - LINE-IN line-in + boost
0x1C - CD-IN N/A
* Most output pins may be used as input pins
** LINE-IN, MIC1 might be output of DAC1
*** those are pins that are connected on my main mobo.
/proc/asound/card0/codec#0 is attached (also for main computer, I will
test the 'one' tomorrow
Best regards,
Maxim Levitsky
Codec: Realtek ALC268
Address: 0
Vendor Id: 0x10ec0268
Subsystem Id: 0x1025011e
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x32 0x32]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x32 0x32]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80]
Connection: 3
0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081003c: IN OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=04, enabled=1
Connection: 1
0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081003c: IN OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a19840: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x083724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x99a30941: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x4, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x0281304e: [Jack] Line In at Ext Front
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x4017952d: [N/A] Speaker at Ext N/A
Conn = Analog, Color = Pink
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x02451130: [Jack] SPDIF Out at Ext Front
Conn = Optical, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x0b 0x0b]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
