On Tue, Nov 11, 2008 at 5:27 PM, Takashi Iwai <tiwai@xxxxxxx> wrote:
> At Tue, 11 Nov 2008 17:15:15 +0530,
> Arun KS wrote:
>>
>> On Tue, Nov 11, 2008 at 4:08 PM, Takashi Iwai <tiwai@xxxxxxx> wrote:
>> > At Tue, 11 Nov 2008 15:55:38 +0530,
>> > Arun KS wrote:
>> >>
>> >> Hi,
>> >>
>> >> I am getting an error for amixer, but my amixer controls works fine.
>> >>
>> >> Here is the log:
>> >>
>> >> [root@OMAP2530EVM ~]#
>> >> [root@OMAP2530EVM ~]#
>> >> [root@OMAP2530EVM ~]#
>> >> [root@OMAP2530EVM ~]# amixer
>> >> amixer: Mixer default load error: Operation not permitted
>> >
>> > How about checking via strace?
>>
>> Below is the strace output:
> ...
>> open("/dev/snd/controlC0", O_RDWR) = 3
>> ioctl(3, USBDEVFS_CONTROL, 0xbea498fc) = 0
>> fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR)
>> fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
>> ioctl(3, USBDEVFS_RELEASEINTERFACE, 0xbea49980) = 0
>> ioctl(3, USBDEVFS_RELEASEINTERFACE, 0xbea49980) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492c0) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492e0) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492e0) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492e0) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492e0) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492d8) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492c0) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492c0) = 0
>> ioctl(3, USBDEVFS_CONNECTINFO, 0xbea49718) = 0
>> ioctl(3, USBDEVFS_IOCTL, 0xbea492c0) = -1 EPERM (Operation not permitted)
>
> Weird. USBDEVFS_IOCTL corresponds to SNDRV_IOCTL_ELEM_REPLACE,
> and USBDEVFS_CONNECTINFO to SNDRV_IOCTL_ELEM_ADD.
> [some strace versions don't show SNDRV_* ioctls because they are defined
> via enum instead of #define in asound.h...]
> These are for user-defined control elements.
> And, strace shows that you don't use any ~/.asound or /etc/asound.conf...
But when i use a different kernel and different codec with the same
file system, amixer is working.
So the filesytem is fine. AM I Rite?
Is it kernel dependent?
Regards,
Arun
> Takashi
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
