At Thu, 23 Oct 2008 19:15:26 +0200, I wrote: > > At Thu, 23 Oct 2008 19:07:40 +0200, > I wrote: > > > > At Thu, 23 Oct 2008 15:23:24 +0100, > > Jason Harvey wrote: > > > > > > Takashi Iwai wrote: > > > > What is the last kernel message from sbxfi driver? > > > > Usually it prints some messages (as debug=1 as default). > > > > > > > > > > > > > > I applied the patch and when trying "mplayer wn.wav" I consistently get > > > the following message on the console > > > > > > PANIC: double fault, gdt at c13f6000 [255 bytes] > > > > > > nothing else, either reboots instantly or locks up. > > > > > > In case you might find it of use I modprobed at debug=3 and ran dmesg > > > before I ran mplayer. Output attached. > > > > Thanks. > > > > The last entries are: > > > > > SBXFI: Setting TLB buffer page 0x1daff000 > > > SBXFI: write(0) 0x13b004 = 0x1daff000 > > > SBXFI: write(0) 0x13b000 = 0x0 > > > > Hm, this smells like a buffer handling issue. > > > > I updated the sbxfi driver code now, added mutex around the code > > handling TLB pages. > > Please give it a try. > > Another patch to try is the one like below (on the top of the latest > code). Any change with this? One another thing I'm wondering is whether this happens only with OSS. What happens if you do like the following to disable the sample rate conversion? # echo mplayer 0 0 direct > /proc/asound/card0/pcm0p/oss Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
