alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> ### Device interface The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring The device exposes all 20 channels in all three playback modes. No mixer controls are available with the current driver. ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic detection) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic detection) - XLR out: AES3 only ### Channel configurations The _HiFi_ use case only exposes the most common channel configurations to limit combinatorial complexity: - Analog line outputs in stereo as well as 4.0 and 5.1 surround, - analog microphone and instrument inputs in mono only, - ADAT Optical outputs and inputs in direct 8‐channel mapping, and - all other outputs and inputs in stereo. [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info.txt) Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf
