[BUG] HDA Intel PCH, HDMI , HDA Intel PCH, ALC886 Digital, no IEC958 / HDMI output/passthrough to AVR
ALSA versions 1.0.28
Kernel Driver versions 3.12.40
Partly FIXED in Longterm Stable Kernel 4.19.324 and using HDMI DEV 1 instead of 0.
2 CH PCM HDMI to AVR works now but AC3/DTS passthrough still not or is not recognized by AVR or some wrong AES setting but iec958
ALC886 optical toslink AC3/DTS output to AVR works.
New BUG: No more 5.1 Analog Output on the CM106 USB Box if AC3 stream is selected.
No. Sorry, VDR xineliboutput config error, needs speaker setup 5.1
instead of pass through.
y
tom
Your ALSA information is located at http://alsa-project.org/db/?f=5ef8b56450583ba8afbcc705afc02228da4a3072
y
tom
Hardware:
DFI Mainboard MB330-CRM
https://www.dfi.com/de/product/index/273#specification
Reproducible Always
Steps to reproduce and full report:
https://www-vdr--portal-de.translate.goog/forum/index.php?thread/136519-gel%C3%B6st-xineliboutput-config-f%C3%BCr-dd-passthrough-zu-avr-und-5-1-surround-headset/&postID=1375883&_x_tr_sl=de&_x_tr_tl=en&_x_tr_hl=de&_x_tr_pto=wapp#post1375883
Output of alsa-info.sh is here
http://alsa-project.org/db/?f=fc4734deddd9a92331692bf94b15cf84b7722cd4
Software crosscheck with CM106 USB Soundbox iec958: works OK.
Where to start in the drivers source code to fix it?
y
tom