On Wed, 15 Oct 2008 08:30:20 +0200 Takashi Iwai <tiwai@xxxxxxx> wrote: > At Wed, 15 Oct 2008 00:35:31 +0400, > Alexey Bazhin wrote: > > > > On Tue, 14 Oct 2008 08:45:20 +0200 > > Takashi Iwai <tiwai@xxxxxxx> wrote: > > > > > At Mon, 13 Oct 2008 23:21:47 +0400, > > > Alexey Bazhin wrote: > > > > > > > > Now it doesn't hangs :) > > > > > > Glad to hear. Did you have to use XXX_SYSTEM_TIMER or any > > > workaround needed? Or, did it work as is? > > > > > > > but speakers-test produces crackling sine and > > > > fails on test... > > > > > > Do you mean it aborts some time later after starting the stream? > > > Could you show the kernel messages? The default debug level > > > should suffice, I guess. If any, try debug=2. > > > > root@mayonaka:~/linux-2.6# dmesg -c >/dev/null > > root@mayonaka:~/linux-2.6# insmod sound/pci/sbxfi/snd-sbxfi.ko > > root@mayonaka:~/linux-2.6# dmesg > > [ 2957.493602] SBXFI: INIT HW > > [ 2957.596133] SBXFI: Setting TLB buffer page 0xc02000 > > root@mayonaka:~/linux-2.6# speaker-test -c 2 -r 96000 -t sine > > > > speaker-test 1.0.15 > > > > Playback device is default > > Stream parameters are 96000Hz, S16_LE, 2 channels > > Sine wave rate is 440.0000Hz > > Rate set to 96000Hz (requested 96000Hz) > > Buffer size range from 32 to 16384 > > Period size range from 32 to 16384 > > Using max buffer size 16384 > > Periods = 4 > > was set period_size = 4096 > > was set buffer_size = 16384 > > 0 - Front Left > > > > > > > > Write error: -5,Input/output error > > xrun_recovery failed: -5,Input/output error > > Transfer failed: Operation not permitted > > root@mayonaka:~/linux-2.6# > > root@mayonaka:~/linux-2.6# dmesg > > [ 2957.493602] SBXFI: INIT HW > > [ 2957.596133] SBXFI: Setting TLB buffer page 0xc02000 > > [ 2974.854578] SBXFI: Allocate SRC 0 > > [ 2974.855368] SBXFI: allocated TLB at 0 for 16 pages > > [ 2974.855372] SBXFI: filled TLB pages starting at 0xc10000 > > [ 2974.855393] SBXFI: PLAYBACK PREPARE: rate=96000, > > period_size=4096, buffer_size=16384 > > [ 2974.855396] SBXFI: INIT DAC > > [ 2974.855400] SBXFI: RESET DAC > > [ 2975.059435] SBXFI: SETUP I2S > > [ 2975.059445] SBXFI: Pitch [0:fa6] = 0x1000000 > > [ 2975.059449] SBXFI: Pitch [80:7a6] = 0x1000000 > > [ 2975.059453] SBXFI: Pitch [1:fb6] = 0x1000000 > > [ 2975.059456] SBXFI: Pitch [81:7b6] = 0x1000000 > > [ 2975.059460] SBXFI: Amp [00:0001] = 0x101c > > [ 2975.059465] SBXFI: Amp [80:07a6] = 0x101c > > [ 2975.059470] SBXFI: Amp [01:0011] = 0x101c > > [ 2975.059474] SBXFI: Amp [81:07b6] = 0x101c > > [ 2975.062594] SBXFI: PLAY TRIGGER START > > [ 2975.062600] SBXFI: SETUP SRC: ch=0x0, start=0x0, loop=0x10000, > > cache=0x100, ctrl=0x1045c > > [ 2975.062612] SBXFI: SETUP SRC: ch=0x1, start=0x0, loop=0x10000, > > cache=0x100, ctrl=0x5c > > [ 2975.062625] SBXFI: PLAY UPDATE TIMER > > [ 2995.148059] SBXFI: PLAY TRIGGER STOP > > [ 2995.148072] SBXFI: PLAY UPDATE TIMER > > [ 2995.148079] SBXFI: release TLB at 0 for 16 pages > > [ 2995.148218] SBXFI: Release SRC 0 > > Hmm, then there is no serious error here. Did you build the driver > with --with-debug=full or --with-debug=detect option? No, i'm just building kernel from git with your tree. > Also, run with debug=2. Then it prints the timer/IRQ handling, too. > > Does this happen with aplay, too? > > Also, please track via strace to check which syscall it gets an error. I'll try it later, sorry... > > Two more things: > > -speakers-test on 48khz doesn't produce above errors, but frequency > > is still not right > > OK, let's postpone this issue. > > > -24-bit samples is silent for me too > > Too? What are other cases that cause silent output? I saw that "The Source <thesourcehim@xxxxxxxxx>" was trying to play only 24-bit 96khz samples and they were silent. > Also, can you check whether "aplay -M foo.wav" (with 96khz sound file) > gives any output? > > > > How about the patch below for 48kHz? > > Didn't changed anything... > > OK. Just to make clear: you get any (more or less) reasonable sound, > not silent, with 96kHz stereo, right? Yes, on 96khz 16bit stereo only > If yes, then there seems a difference between machines or > environments. Could you clarify your system again? > > > Takashi -- Alexey Bazhin mailto:baz@xxxxxxxxxx ICQ 125125882 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
