At Tue, 14 Oct 2008 15:24:22 +0400, The Source wrote: > > By the way, note, that not rate may cause oops but number of channles > for example (wav that causes oops has mono mode and the one that just > plays silently - stereo. Also the oops sample is 16bit, silent one is > 24bit). This is an important information. The driver basically supports only 16bit stereo samples natively. The others are covered by alsa-lib, and this involves with the mmap mode. But I still wonder why 16bit mode. OK, the below is *THE* test I'd like ask you guys to try first. - Build the driver with --with-debug=detect option - Load the driver with debug=2 module option - Prepare a WAV file with 96kHz 16bit stereo, e.g. converted via sox - Raise the Master volume to the max - Run "aplay this.wav" At *each* run, check your kernel message. If you get Oops, copy the whole log immediately. - If you get a DMA error or so in the kernel message, try to define XXX_SYSTEM_TIMER in sbxfi.c, rebuild and reinstall the driver. Run the same test. - If still any serious problem, load the module with debug=3 option, and get the whole kernel message with full register accesses. thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
