Op 01-10-2024 om 11:16 schreef Jack Yu:
This is the first version of common functions for Realtek
soundwire codec driver.
Signed-off-by: Jack Yu <jack.yu@xxxxxxxxxxx>
---
sound/soc/codecs/Kconfig | 5 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/rt-sdw-common.c | 238 +++++++++++++++++++++++++++++++
sound/soc/codecs/rt-sdw-common.h | 66 +++++++++
4 files changed, 311 insertions(+)
create mode 100644 sound/soc/codecs/rt-sdw-common.c
create mode 100644 sound/soc/codecs/rt-sdw-common.h
[...]
+/**
+ * rt_sdca_headset_detect - Headset jack type detection.
+ *
+ * @map: map for setting.
+ * @entity_id: SDCA entity ID.
+ *
+ * A headset jack type will be returned, a negative errno will
+ * be returned in error cases.
+ */
+int rt_sdca_headset_detect(struct regmap *map, unsigned int entity_id)
+{
+ unsigned int det_mode, jack_type;
+ int ret;
+
+ /* get detected_mode */
+ ret = regmap_read(map, SDW_SDCA_CTL(SDCA_NUM_JACK_CODEC, entity_id,
+ RT_SDCA_CTL_DETECTED_MODE, 0), &det_mode);
+
+ if (ret < 0)
+ goto io_error;
+
+ switch (det_mode) {
+ case 0x00:
+ jack_type = 0;
+ break;
+ case 0x03:
+ jack_type = SND_JACK_HEADPHONE;
+ break;
+ case 0x05:
+ jack_type = SND_JACK_HEADSET;
+ break;
There is no default case. So, variable jack_type can remain
uninitialized and then used for the return value.
Perhaps you can combine "case 0x00" with "default".
+ }
+
+ /* write selected_mode */
+ if (det_mode) {
+ ret = regmap_write(map, SDW_SDCA_CTL(SDCA_NUM_JACK_CODEC, entity_id,
+ RT_SDCA_CTL_SELECTED_MODE, 0), det_mode);
+ if (ret < 0)
+ goto io_error;
+ }
+
+ return jack_type;
