On 08/10/2024 17:49, Marc Gonzalez wrote:
> On 08/10/2024 15:46, Marc Gonzalez wrote:
>
>> [ 15.106412] qcom,apr 17300000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:apr-service:4:3
>> [ 15.109935] qcom,apr 17300000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:apr-service:4:4
>> [ 15.119041] qcom-q6afe aprsvc:apr-service:4:4: YO: q6afe_probe:1759
>> [ 15.134672] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: YOA: q6afe_dai_dev_probe
>> [ 15.137948] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: YOA: of_q6afe_parse_dai_data
>> [ 15.146461] qcom,apr 17300000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:apr-service:4:7
>> [ 15.153563] remoteproc remoteproc0: powering up 4080000.remoteproc
>> [ 15.166371] remoteproc remoteproc0: Booting fw image mba.mbn, size 234152
>> [ 15.169747] q6asm-dai 17300000.remoteproc:glink-edge:apr:apr-service@7:dais: Adding to iommu group 5
>> [ 15.170559] qcom,apr 17300000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:apr-service:4:8
>> [ 15.179732] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: YOA: msm_dai_q6_dai_probe
>> [ 15.199345] qcom-q6afe aprsvc:apr-service:4:4: YO: q6afe_find_port:860
>> [ 15.208834] msm-snd-msm8998 sound: ASoC: registered pcm #0 MultiMedia1 (*)
>> [ 15.216194] msm-snd-msm8998 sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
>> [ 15.221994] msm-snd-msm8998 sound: ASoC: registered pcm #1 MultiMedia2 (*)
>> [ 15.229582] msm-snd-msm8998 sound: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
>> [ 15.236045] msm-snd-msm8998 sound: ASoC: registered pcm #2 (HDMI)
>> [ 15.243211] msm-snd-msm8998 sound: i2s-hifi <-> HDMI mapping ok
>> [ 15.285770] input: batfish Headset Jack as /devices/platform/sound/sound/card0/input2
>> [ 15.298010] qcom-q6v5-mss 4080000.remoteproc: MBA booted without debug policy, loading mpss
>> [ 15.542937] remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
>
> If I try to play sound on the HDMI link:
>
> # tinymix set "HDMI Mixer MultiMedia1" 1
> (no logs on the command line or in dmesg)
>
> # tinyplay /home/equinox.wav
> playing '/home/equinox.wav': 2 ch, 48000 hz, 16 bit
> error playing sample
>
> The corresponding kernel logs are:
>
> [ 204.324095] msm-snd-msm8998 sound: ASoC: find BE for widget MultiMedia1 Playback
> [ 204.324280] msm-snd-msm8998 sound: ASoC: try BE : HDMI Playback
> [ 204.330832] msm-snd-msm8998 sound: ASoC: try BE : I2S Playback
> [ 204.336452] msm-snd-msm8998 sound: ASoC: find BE for widget MM_DL1
> [ 204.342361] msm-snd-msm8998 sound: ASoC: try BE : HDMI Playback
> [ 204.348471] msm-snd-msm8998 sound: ASoC: try BE : I2S Playback
> [ 204.354319] msm-snd-msm8998 sound: ASoC: find BE for widget HDMI Mixer
> [ 204.360152] msm-snd-msm8998 sound: ASoC: try BE : HDMI Playback
> [ 204.366702] msm-snd-msm8998 sound: ASoC: try BE : I2S Playback
> [ 204.372545] msm-snd-msm8998 sound: ASoC: find BE for widget HDMI_RX
> [ 204.378439] msm-snd-msm8998 sound: ASoC: try BE : HDMI Playback
> [ 204.384520] msm-snd-msm8998 sound: ASoC: try BE : I2S Playback
> [ 204.390471] msm-snd-msm8998 sound: ASoC: find BE for widget HDMI Playback
> [ 204.396400] msm-snd-msm8998 sound: ASoC: try BE : HDMI Playback
> [ 204.403231] MultiMedia1: ASoC: found 2 audio Playback paths
> [ 204.408912] MultiMedia1: YO: dpcm_add_paths:1595
> [ 204.414855] MultiMedia1: YO: dpcm_add_paths:1601
> [ 204.419435] MultiMedia1: YO: dpcm_add_paths:1605 widget=MM_DL1
> [ 204.424105] MultiMedia1: YO: dpcm_add_paths:1605 widget=HDMI Mixer
> [ 204.429867] MultiMedia1: YO: dpcm_add_paths:1605 widget=HDMI_RX
> [ 204.436139] MultiMedia1: YO: dpcm_add_paths:1605 widget=HDMI Playback
> [ 204.442394] msm-snd-msm8998 sound: ASoC: find BE for widget HDMI Playback
> [ 204.448691] msm-snd-msm8998 sound: ASoC: try BE : HDMI Playback
> [ 204.455581] MultiMedia1: YO: dpcm_add_paths:1638
> [ 204.461316] MultiMedia1: connected new DPCM Playback path MultiMedia1 -> HDMI
> [ 204.466220] MultiMedia1: ASoC: found 1 new BE paths
> [ 204.473232] HDMI: ASoC: open Playback BE HDMI
> [ 204.478379] MultiMedia1: ASoC: open FE MultiMedia1
> [ 204.482911] HDMI: ASoC: hw_params BE HDMI
> [ 204.487489] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: YOA: q6hdmi_hw_params
> [ 204.491715] MultiMedia1: ASoC: hw_params FE MultiMedia1 rate 48000 chan 2 fmt 2
> [ 204.500814] MultiMedia1: ASoC: prepare FE MultiMedia1
> [ 204.508108] HDMI: ASoC: prepare BE HDMI
> [ 204.512978] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: YOA: q6afe_dai_prepare
> [ 204.517117] qcom-q6afe aprsvc:apr-service:4:4: YO: q6afe_hdmi_port_prepare:1317
> [ 204.525864] qcom-q6afe aprsvc:apr-service:4:4: YO: q6afe_port_start:1511
> [ 204.533151] qcom-q6afe aprsvc:apr-service:4:4: YO: q6afe_port_set_param_v2:1050
> [ 204.540129] qcom-q6afe aprsvc:apr-service:4:4: YO: afe_apr_send_pkt:947
> [ 204.547820] qcom-q6afe aprsvc:apr-service:4:4: YO: q6afe_callback:880
> [ 204.553692] qcom-q6afe aprsvc:apr-service:4:4: cmd = 0x100ef returned error = 0x18
> [ 204.560292] qcom-q6afe aprsvc:apr-service:4:4: YO: q6afe_find_port:860
> [ 204.567937] qcom-q6afe aprsvc:apr-service:4:4: DSP returned error[18]
> [ 204.574262] qcom-q6afe aprsvc:apr-service:4:4: AFE enable for port 0x100e failed -22
> [ 204.583561] qcom-q6afe aprsvc:apr-service:4:4: AFE enable for port 0x100e failed -22
> [ 204.591317] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: fail to start AFE port 1
> [ 204.599101] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: ASoC: error at snd_soc_pcm_dai_prepare on HDMI: -22
> [ 204.608501] MultiMedia1: ASoC: hw_free FE MultiMedia1
> [ 204.619781] HDMI: ASoC: hw_free BE HDMI
> [ 204.624821] q6afe-dai 17300000.remoteproc:glink-edge:apr:apr-service@4:dais: YOA: q6afe_dai_shutdown
> [ 204.628835] MultiMedia1: ASoC: close FE MultiMedia1
> [ 204.637798] HDMI: ASoC: BE HDMI event 2 dir 0
> [ 204.642745] MultiMedia1: ASoC: BE Playback disconnect check for HDMI
> [ 204.646987] MultiMedia1: freed DSP Playback path MultiMedia1 -> HDMI
>
>
> Looks like the audio DSP might not be correctly initialized?
[ Adding Bjorn & Jeffrey & Rohit ]
Right now, I'm thinking I might (??) need the code in sound/soc/qcom/lpass-cpu.c
to be called.
$ git grep asoc_qcom_lpass_cpu_platform_probe
sound/soc/qcom/lpass-apq8016.c: .probe = asoc_qcom_lpass_cpu_platform_probe,
sound/soc/qcom/lpass-cpu.c:int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
sound/soc/qcom/lpass-cpu.c:EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_probe);
sound/soc/qcom/lpass-ipq806x.c: .probe = asoc_qcom_lpass_cpu_platform_probe,
sound/soc/qcom/lpass-msm8998.c: .probe = asoc_qcom_lpass_cpu_platform_probe,
sound/soc/qcom/lpass-sc7180.c: .probe = asoc_qcom_lpass_cpu_platform_probe,
sound/soc/qcom/lpass-sc7280.c: .probe = asoc_qcom_lpass_cpu_platform_probe,
sound/soc/qcom/lpass.h:int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev);
For example, lpass-sc7280.c defines "qcom,sc7280-lpass-cpu"
Binding:
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
Corresponding DTS in arch/arm64/boot/dts/qcom/sc7280.dtsi
lpass_cpu: audio@3987000 {
compatible = "qcom,sc7280-lpass-cpu";
reg = <0 0x03987000 0 0x68000>,
<0 0x03b00000 0 0x29000>,
<0 0x03260000 0 0xc000>,
<0 0x03280000 0 0x29000>,
<0 0x03340000 0 0x29000>,
<0 0x0336c000 0 0x3000>;
reg-names = "lpass-hdmiif",
"lpass-lpaif",
"lpass-rxtx-cdc-dma-lpm",
"lpass-rxtx-lpaif",
"lpass-va-lpaif",
"lpass-va-cdc-dma-lpm";
iommus = <&apps_smmu 0x1820 0>,
<&apps_smmu 0x1821 0>,
<&apps_smmu 0x1832 0>;
power-domains = <&rpmhpd SC7280_LCX>;
power-domain-names = "lcx";
required-opps = <&rpmhpd_opp_nom>;
clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
<&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>,
<&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
<&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
<&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
<&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
<&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
<&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
<&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
<&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
clock-names = "aon_cc_audio_hm_h",
"audio_cc_ext_mclk0",
"core_cc_sysnoc_mport_core",
"core_cc_ext_if0_ibit",
"core_cc_ext_if1_ibit",
"audio_cc_codec_mem",
"audio_cc_codec_mem0",
"audio_cc_codec_mem1",
"audio_cc_codec_mem2",
"aon_cc_va_mem0";
#sound-dai-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "lpass-irq-lpaif",
"lpass-irq-hdmi",
"lpass-irq-vaif",
"lpass-irq-rxtxif";
status = "disabled";
};
Is there an equivalent HW block for msm8998?
Vendor kernel has no hits for hdmiif.
I don't see anything relevant downstream :(
Do I need to look at the HW block at address 0xee000000 ?
lpass-lpaif could be LPASS_LPA_IF_REG_BASE at LPASS_BASE + 0x00100000 ?
Regards
