Re: [PATCH 01/13] ALSA: pcm: add more sample rate definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/11/2024 2:42 PM, Takashi Iwai wrote:
On Wed, 11 Sep 2024 12:58:53 +0200,
Jaroslav Kysela wrote:

On 11. 09. 24 12:51, Takashi Iwai wrote:
On Wed, 11 Sep 2024 12:33:01 +0200,
Péter Ujfalusi wrote:

On 11/09/2024 12:21, Takashi Iwai wrote:
Wondering if this is backwards compatible with the alsa-lib definitions,
specifically the topology parts which did unfortunately have a list of
rates that will map to a different index now:


typedef enum _snd_pcm_rates {
	SND_PCM_RATE_UNKNOWN = -1,
	SND_PCM_RATE_5512 = 0,
	SND_PCM_RATE_8000,
	SND_PCM_RATE_11025,
	SND_PCM_RATE_16000,
	SND_PCM_RATE_22050,
	SND_PCM_RATE_32000,
	SND_PCM_RATE_44100,
	SND_PCM_RATE_48000,
	SND_PCM_RATE_64000,
	SND_PCM_RATE_88200,
	SND_PCM_RATE_96000,
	SND_PCM_RATE_176400,
	SND_PCM_RATE_192000,
	SND_PCM_RATE_CONTINUOUS = 30,
	SND_PCM_RATE_KNOT = 31,
	SND_PCM_RATE_LAST = SND_PCM_RATE_KNOT,
} snd_pcm_rates_t;

As far as I understand correctly, those rate bits used for topology
are independent from the bits used for PCM core, although it used to
be the same.  Maybe better to rename (such as SND_TPLG_RATE_*) so that
it's clearer only for topology stuff.

Even if we rename these in alsa-lib we will need translation from
SND_TPLG_RATE_ to SND_PCM_RATE_ in kernel likely?

The topology files are out there and this is an ABI...

But it'd be better if anyone can double-check.

Since the kernel just copies the rates bitfield, any rate above 11025
will be misaligned and result broken setup.

Yep, I noticed it now, too.

Below is the fix patch, totally untested.
It'd be appreciated if anyone can test it quickly.


thanks,

Takashi

-- 8< --
From: Takashi Iwai <tiwai@xxxxxxx>
Subject: [PATCH] ALSA: pcm: Fix breakage of PCM rates used for topology

It turned out that the topology ABI takes the standard PCM rate bits
as is, and it means that the recent change of the PCM rate bits would
lead to the inconsistent rate values used for topology.

This patch reverts the original PCM rate bit definitions while adding
the new rates to the extended bits instead.  This needed the change of
snd_pcm_known_rates, too.  And this also required to fix the handling
in snd_pcm_hw_limit_rates() that blindly assumed that the list is
sorted while it became unsorted now.

Fixes: 090624b7dc83 ("ALSA: pcm: add more sample rate definitions")
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>

This looks fine. But the topology rate bits should not depend on those
bits. It's a bit pitty that the standard PCM ABI does not use those
bits for user space and we are doing this change just for topology
ABI.

Yeah, and theoretically it's possible to fix in topology side, but
it'll be more cumbersome.

Although it's not really a part of PCM ABI, I believe we should move
the PCM rate bit definitions to uapi, for showing that it's set in
stone.  Something like below.


Takashi

-- 8< --
From: Takashi Iwai <tiwai@xxxxxxx>
Subject: [PATCH] ALSA: pcm: Move standard rate bit definitions into uapi

Since the standard PCM rate bits are used for the topology ABI, it's a
part of public ABI that must not be changed.  Move the definitions
into uapi to indicate it more clearly.

Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
---
  include/sound/pcm.h         | 26 --------------------------
  include/uapi/sound/asound.h | 26 ++++++++++++++++++++++++++
  2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 824216799070..f28f6d6ac996 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -105,32 +105,6 @@ struct snd_pcm_ops {
#define SNDRV_PCM_POS_XRUN ((snd_pcm_uframes_t)-1) -/* If you change this don't forget to change rates[] table in pcm_native.c */
-#define SNDRV_PCM_RATE_5512		(1U<<0)		/* 5512Hz */
-#define SNDRV_PCM_RATE_8000		(1U<<1)		/* 8000Hz */
-#define SNDRV_PCM_RATE_11025		(1U<<2)		/* 11025Hz */
-#define SNDRV_PCM_RATE_16000		(1U<<3)		/* 16000Hz */
-#define SNDRV_PCM_RATE_22050		(1U<<4)		/* 22050Hz */
-#define SNDRV_PCM_RATE_32000		(1U<<5)		/* 32000Hz */
-#define SNDRV_PCM_RATE_44100		(1U<<6)		/* 44100Hz */
-#define SNDRV_PCM_RATE_48000		(1U<<7)		/* 48000Hz */
-#define SNDRV_PCM_RATE_64000		(1U<<8)		/* 64000Hz */
-#define SNDRV_PCM_RATE_88200		(1U<<9)		/* 88200Hz */
-#define SNDRV_PCM_RATE_96000		(1U<<10)	/* 96000Hz */
-#define SNDRV_PCM_RATE_176400		(1U<<11)	/* 176400Hz */
-#define SNDRV_PCM_RATE_192000		(1U<<12)	/* 192000Hz */
-#define SNDRV_PCM_RATE_352800		(1U<<13)	/* 352800Hz */
-#define SNDRV_PCM_RATE_384000		(1U<<14)	/* 384000Hz */
-#define SNDRV_PCM_RATE_705600		(1U<<15)	/* 705600Hz */
-#define SNDRV_PCM_RATE_768000		(1U<<16)	/* 768000Hz */
-/* extended rates */
-#define SNDRV_PCM_RATE_12000		(1U<<17)	/* 12000Hz */
-#define SNDRV_PCM_RATE_24000		(1U<<18)	/* 24000Hz */
-#define SNDRV_PCM_RATE_128000		(1U<<19)	/* 128000Hz */
-
-#define SNDRV_PCM_RATE_CONTINUOUS	(1U<<30)	/* continuous range */
-#define SNDRV_PCM_RATE_KNOT		(1U<<31)	/* supports more non-continuous rates */
-
  #define SNDRV_PCM_RATE_8000_44100	(SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_11025|\
  					 SNDRV_PCM_RATE_16000|SNDRV_PCM_RATE_22050|\
  					 SNDRV_PCM_RATE_32000|SNDRV_PCM_RATE_44100)
diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h
index 4cd513215bcd..715ceb3eac7c 100644
--- a/include/uapi/sound/asound.h
+++ b/include/uapi/sound/asound.h
@@ -272,6 +272,32 @@ typedef int __bitwise snd_pcm_subformat_t;
  #define	SNDRV_PCM_SUBFORMAT_MSBITS_24	((__force snd_pcm_subformat_t) 3)
  #define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_MSBITS_24
+/* Standard rate bits */
+#define SNDRV_PCM_RATE_5512		(1U<<0)		/* 5512Hz */
+#define SNDRV_PCM_RATE_8000		(1U<<1)		/* 8000Hz */
+#define SNDRV_PCM_RATE_11025		(1U<<2)		/* 11025Hz */
+#define SNDRV_PCM_RATE_16000		(1U<<3)		/* 16000Hz */
+#define SNDRV_PCM_RATE_22050		(1U<<4)		/* 22050Hz */
+#define SNDRV_PCM_RATE_32000		(1U<<5)		/* 32000Hz */
+#define SNDRV_PCM_RATE_44100		(1U<<6)		/* 44100Hz */
+#define SNDRV_PCM_RATE_48000		(1U<<7)		/* 48000Hz */
+#define SNDRV_PCM_RATE_64000		(1U<<8)		/* 64000Hz */
+#define SNDRV_PCM_RATE_88200		(1U<<9)		/* 88200Hz */
+#define SNDRV_PCM_RATE_96000		(1U<<10)	/* 96000Hz */
+#define SNDRV_PCM_RATE_176400		(1U<<11)	/* 176400Hz */
+#define SNDRV_PCM_RATE_192000		(1U<<12)	/* 192000Hz */
+#define SNDRV_PCM_RATE_352800		(1U<<13)	/* 352800Hz */
+#define SNDRV_PCM_RATE_384000		(1U<<14)	/* 384000Hz */
+#define SNDRV_PCM_RATE_705600		(1U<<15)	/* 705600Hz */
+#define SNDRV_PCM_RATE_768000		(1U<<16)	/* 768000Hz */
+/* extended rates */
+#define SNDRV_PCM_RATE_12000		(1U<<17)	/* 12000Hz */
+#define SNDRV_PCM_RATE_24000		(1U<<18)	/* 24000Hz */
+#define SNDRV_PCM_RATE_128000		(1U<<19)	/* 128000Hz */
+
+#define SNDRV_PCM_RATE_CONTINUOUS	(1U<<30)	/* continuous range */
+#define SNDRV_PCM_RATE_KNOT		(1U<<31)	/* supports more non-continuous rates */
+
  #define SNDRV_PCM_INFO_MMAP		0x00000001	/* hardware supports mmap */
  #define SNDRV_PCM_INFO_MMAP_VALID	0x00000002	/* period data are valid during transfer */
  #define SNDRV_PCM_INFO_DOUBLE		0x00000004	/* Double buffering needed for PCM start/stop */

I will just note that alternatively we could bump topology ABI (wouldn't be first time) and provide mapping in soc-topology.c for current one.

For ABI+1 we could remove the field from problematic topology struct to not make SNDRV_PCM_RATE_* part of UAPI and provide some other way to pass expected rates.



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux