On Samstag, 10. August 2024 14:35:00 MESZ Konrad Dybcio wrote: > On 9.08.2024 10:33 AM, Luca Weiss wrote: > > Add the necessary sound card bits and some dts additions to enable sound > > over DisplayPort-over-USB-C, e.g. to a connected TV or monitor. > > > > The UCM files can be found here: > > https://gitlab.com/postmarketOS/pmaports/-/tree/master/device/testing/ device-fairphone-fp5/ucm > > > > Two extra notes: > > > > 1. I don't quite understand whether the sound driver should have > > SoC-specific compatible or device-specific compatible. Some earlier > > patches by another author for a QCM6490 board and a QCS6490 board use > > device-specific compatible - but from what I can tell this is not how > > it's generally done for other sound drivers? > > > > 2. Unfortunately DisplayPort enablement itself for Fairphone 5 is not > > upstream yet. This is blocked by DSI display bringup upstream which > > is blocked by DSC 1:1:1 not being supported upstream yet and just > > working with a hacky patch. Nevertheless, DisplayPort audio was > > validated working with no additional sound-related changes so once > > DisplayPort gets enabled, sound should also just work upstream. > > You can enable DP and keep DSI disabled for the time being I need to enable dispcc for DP which breaks simple-fb from my testing? Maybe I can figure out the correct clocks and power domains to put into the simple-fb node? Do you think that would work and be sufficient to make both simple-fb and DP work? > > Konrad >
