On Thu, Jun 27, 2024 at 10:31:03AM +0200, Elinor Montmasson wrote:
> The merge of imx-spdif driver into fsl-asoc-card brought
> new DT properties that can be used with the "fsl,imx-audio-spdif"
> compatible:
> * The "spdif-controller" property from imx-spdif is named "audio-cpu"
> in fsl-asoc-card.
> * fsl-asoc-card uses codecs explicitly declared in DT
> with "audio-codec".
> With an S/PDIF, codec drivers spdif_transmitter and
> spdif_receiver should be used.
> Driver imx-spdif used instead the dummy codec and a pair of
> boolean properties, "spdif-in" and "spdif-out".
>
> While backward compatibility is kept to support properties
> "spdif-controller", "spdif-in" and "spdif-out", using new properties has
> several benefits:
> * "audio-cpu" and "audio-codec" are more generic names reflecting
> that the fsl-asoc-card driver supports multiple hardware.
> They are properties already used by devices using the
> fsl-asoc-card driver.
> They are also similar to properties of simple-card: "cpu" and "codec".
> * "spdif-in" and "spdif-out" imply the use of the dummy codec in the
> driver. However, there are already two codec drivers for the S/PDIF,
> spdif_transmitter and spdif_receiver.
> It is better to declare S/PDIF Tx and Rx devices in a DT, and then
> reference them with "audio-codec" than using the dummy codec.
>
> For those reasons, this commit updates in-tree DTs to use the new
> properties:
> * Rename "spdif-controller" property to "audio-cpu".
> * Declare S/PDIF transmitter and/or receiver devices, and use them with
> the "audio-codec" property instead of "spdif-out" and/or "spdif-in".
>
> These modifications were tested only on an imx8mn-evk board.
>
> Note that out-of-tree and old DTs are still supported.
>
> Signed-off-by: Elinor Montmasson <elinor.montmasson@xxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 15 +++++++++---
> arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 15 +++++++++---
> arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 24 +++++++++++++++----
> 3 files changed, 43 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> index 90d1901df2b1..348855a41852 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> @@ -180,12 +180,21 @@ cpu {
> };
> };
>
> + spdif_out: spdif-out {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dit";
It's recommended that the property list begins with 'compatible'. Could
you flip them?
Shawn
> + };
> +
> + spdif_in: spdif-in {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dir";
> + };
> +
> sound-spdif {
> compatible = "fsl,imx-audio-spdif";
> model = "imx-spdif";
> - spdif-controller = <&spdif1>;
> - spdif-out;
> - spdif-in;
> + audio-cpu = <&spdif1>;
> + audio-codec = <&spdif_out>, <&spdif_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> index 9e0259ddf4bc..6a47e09703a7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> @@ -124,12 +124,21 @@ sound-wm8524 {
> "Line Out Jack", "LINEVOUTR";
> };
>
> + spdif_out: spdif-out {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dit";
> + };
> +
> + spdif_in: spdif-in {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dir";
> + };
> +
> sound-spdif {
> compatible = "fsl,imx-audio-spdif";
> model = "imx-spdif";
> - spdif-controller = <&spdif1>;
> - spdif-out;
> - spdif-in;
> + audio-cpu = <&spdif1>;
> + audio-codec = <&spdif_out>, <&spdif_in>;
> };
>
> sound-micfil {
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 7507548cdb16..b953865f0b46 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -125,19 +125,33 @@ link_codec: simple-audio-card,codec {
> };
> };
>
> + spdif_out: spdif-out {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dit";
> + };
> +
> + spdif_in: spdif-in {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dir";
> + };
> +
> sound-spdif {
> compatible = "fsl,imx-audio-spdif";
> model = "imx-spdif";
> - spdif-controller = <&spdif1>;
> - spdif-out;
> - spdif-in;
> + audio-cpu = <&spdif1>;
> + audio-codec = <&spdif_out>, <&spdif_in>;
> + };
> +
> + hdmi_arc_in: hdmi-arc-in {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dir";
> };
>
> sound-hdmi-arc {
> compatible = "fsl,imx-audio-spdif";
> model = "imx-hdmi-arc";
> - spdif-controller = <&spdif2>;
> - spdif-in;
> + audio-cpu = <&spdif2>;
> + audio-codec = <&hdmi_arc_in>;
> };
> };
>
> --
> 2.34.1
>
