The existing code modifies IRAM and DRAM size after sha dma start for
vangogh platform. The problem with this sequence is that it might cause
sha dma failure when firmware code binary size is greater than the default
IRAM size. To fix this issue, Move the iram-dram fence register sequence
prior to sha dma start.
Fixes: 094d11768f74 ("ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@xxxxxxx>
---
changes since v1:
- Rephrase commit description
sound/soc/sof/amd/acp.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/sound/soc/sof/amd/acp.c b/sound/soc/sof/amd/acp.c
index 7b122656efd1..b8d4f986f89d 100644
--- a/sound/soc/sof/amd/acp.c
+++ b/sound/soc/sof/amd/acp.c
@@ -263,6 +263,17 @@ int configure_and_run_sha_dma(struct acp_dev_data *adata, void *image_addr,
snd_sof_dsp_write(sdev, ACP_DSP_BAR, ACP_SHA_DMA_STRT_ADDR, start_addr);
snd_sof_dsp_write(sdev, ACP_DSP_BAR, ACP_SHA_DMA_DESTINATION_ADDR, dest_addr);
snd_sof_dsp_write(sdev, ACP_DSP_BAR, ACP_SHA_MSG_LENGTH, image_length);
+
+ /* psp_send_cmd only required for vangogh platform (rev - 5) */
+ if (desc->rev == 5 && !(adata->quirks && adata->quirks->skip_iram_dram_size_mod)) {
+ /* Modify IRAM and DRAM size */
+ ret = psp_send_cmd(adata, MBOX_ACP_IRAM_DRAM_FENCE_COMMAND | IRAM_DRAM_FENCE_2);
+ if (ret)
+ return ret;
+ ret = psp_send_cmd(adata, MBOX_ACP_IRAM_DRAM_FENCE_COMMAND | MBOX_ISREADY_FLAG);
+ if (ret)
+ return ret;
+ }
snd_sof_dsp_write(sdev, ACP_DSP_BAR, ACP_SHA_DMA_CMD, ACP_SHA_RUN);
ret = snd_sof_dsp_read_poll_timeout(sdev, ACP_DSP_BAR, ACP_SHA_TRANSFER_BYTE_CNT,
@@ -280,17 +291,6 @@ int configure_and_run_sha_dma(struct acp_dev_data *adata, void *image_addr,
return ret;
}
- /* psp_send_cmd only required for vangogh platform (rev - 5) */
- if (desc->rev == 5 && !(adata->quirks && adata->quirks->skip_iram_dram_size_mod)) {
- /* Modify IRAM and DRAM size */
- ret = psp_send_cmd(adata, MBOX_ACP_IRAM_DRAM_FENCE_COMMAND | IRAM_DRAM_FENCE_2);
- if (ret)
- return ret;
- ret = psp_send_cmd(adata, MBOX_ACP_IRAM_DRAM_FENCE_COMMAND | MBOX_ISREADY_FLAG);
- if (ret)
- return ret;
- }
-
ret = snd_sof_dsp_read_poll_timeout(sdev, ACP_DSP_BAR, ACP_SHA_DSP_FW_QUALIFIER,
fw_qualifier, fw_qualifier & DSP_FW_RUN_ENABLE,
ACP_REG_POLL_INTERVAL, ACP_DMA_COMPLETE_TIMEOUT_US);
--
2.34.1
