The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
include/sound/tas2781.h | 7 +------
sound/pci/hda/tas2781_hda_i2c.c | 2 +-
sound/soc/codecs/tas2781-comlib.c | 3 ---
sound/soc/codecs/tas2781-fmwlib.c | 1 -
sound/soc/codecs/tas2781-i2c.c | 24 +++---------------------
5 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h
index 18161d02a96f..dbda552398b5 100644
--- a/include/sound/tas2781.h
+++ b/include/sound/tas2781.h
@@ -81,11 +81,6 @@ struct tasdevice {
bool is_loaderr;
};
-struct tasdevice_irqinfo {
- int irq_gpio;
- int irq;
-};
-
struct calidata {
unsigned char *data;
unsigned long total_sz;
@@ -93,7 +88,6 @@ struct calidata {
struct tasdevice_priv {
struct tasdevice tasdevice[TASDEVICE_MAX_CHANNELS];
- struct tasdevice_irqinfo irq_info;
struct tasdevice_rca rcabin;
struct calidata cali_data;
struct tasdevice_fw *fmw;
@@ -115,6 +109,7 @@ struct tasdevice_priv {
unsigned int chip_id;
unsigned int sysclk;
+ int irq;
int cur_prog;
int cur_conf;
int fw_state;
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 49bd7097d892..8a7fe48043d2 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -814,7 +814,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
} else
return -ENODEV;
- tas_hda->priv->irq_info.irq = clt->irq;
+ tas_hda->priv->irq = clt->irq;
ret = tas2781_read_acpi(tas_hda->priv, device_name);
if (ret)
return dev_err_probe(tas_hda->dev, ret,
diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c
index 1fbf4560f5cc..28d8b4d7b985 100644
--- a/sound/soc/codecs/tas2781-comlib.c
+++ b/sound/soc/codecs/tas2781-comlib.c
@@ -14,7 +14,6 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -411,8 +410,6 @@ EXPORT_SYMBOL_GPL(tasdevice_dsp_remove);
void tasdevice_remove(struct tasdevice_priv *tas_priv)
{
- if (gpio_is_valid(tas_priv->irq_info.irq_gpio))
- gpio_free(tas_priv->irq_info.irq_gpio);
mutex_destroy(&tas_priv->codec_lock);
}
EXPORT_SYMBOL_GPL(tasdevice_remove);
diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c
index 8f9a3ae7153e..f3a7605f0710 100644
--- a/sound/soc/codecs/tas2781-fmwlib.c
+++ b/sound/soc/codecs/tas2781-fmwlib.c
@@ -13,7 +13,6 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/slab.h>
diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c
index e79d613745b4..fdf0840ac6c7 100644
--- a/sound/soc/codecs/tas2781-i2c.c
+++ b/sound/soc/codecs/tas2781-i2c.c
@@ -22,7 +22,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -757,7 +756,7 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv)
{
struct i2c_client *client = (struct i2c_client *)tas_priv->client;
unsigned int dev_addrs[TASDEVICE_MAX_CHANNELS];
- int rc, i, ndev = 0;
+ int i, ndev = 0;
if (tas_priv->isacpi) {
ndev = device_property_read_u32_array(&client->dev,
@@ -772,7 +771,7 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv)
"ti,audio-slots", dev_addrs, ndev);
}
- tas_priv->irq_info.irq_gpio =
+ tas_priv->irq =
acpi_dev_gpio_irq_get(ACPI_COMPANION(&client->dev), 0);
} else if (IS_ENABLED(CONFIG_OF)) {
struct device_node *np = tas_priv->dev->of_node;
@@ -784,7 +783,7 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv)
dev_addrs[ndev++] = addr;
}
- tas_priv->irq_info.irq_gpio = of_irq_get(np, 0);
+ tas_priv->irq = of_irq_get(np, 0);
} else {
ndev = 1;
dev_addrs[0] = client->addr;
@@ -800,23 +799,6 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv)
__func__);
strcpy(tas_priv->dev_name, tasdevice_id[tas_priv->chip_id].name);
-
- if (gpio_is_valid(tas_priv->irq_info.irq_gpio)) {
- rc = gpio_request(tas_priv->irq_info.irq_gpio,
- "AUDEV-IRQ");
- if (!rc) {
- gpio_direction_input(
- tas_priv->irq_info.irq_gpio);
-
- tas_priv->irq_info.irq =
- gpio_to_irq(tas_priv->irq_info.irq_gpio);
- } else
- dev_err(tas_priv->dev, "%s: GPIO %d request error\n",
- __func__, tas_priv->irq_info.irq_gpio);
- } else
- dev_err(tas_priv->dev,
- "Looking up irq-gpio property failed %d\n",
- tas_priv->irq_info.irq_gpio);
}
static int tasdevice_i2c_probe(struct i2c_client *i2c)
--
2.45.2
