The reset GPIO of WCD9390/WCD9395 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity, instead of IRQ flag (which is a logical mistake on its own).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
index 6e76f6a8634f..c69291f4d575 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
@@ -52,10 +52,10 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
codec {
compatible = "qcom,wcd9390-codec";
- reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
+ reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <1>;
qcom,tx-device = <&wcd939x_tx>;
qcom,rx-device = <&wcd939x_rx>;
--
2.43.0
