Hello,
all mixer levels are ok.
I have several times checked all settings. I deinstalled and reinstalled the drivers in yast2, too.
The phenomenon is that then a sound is playing, once an incredible noice is playing over the original sound.
And this sound is stopping first about ten seconds after I closed the player. It's like an feedback loop.
Greetings
Ronald
> ICH9 sound should be supported. And, as you see, your card is
> detected. Perhaps the codec or that specific notebook isn't supported.
> Are you sure mixer levels are adjusted properly?
> > I'm using a HP Pavilion dv7-1045eg. The Problem is I have no sound,
> > because there is no driver witch works.
> > Here are some reports from my system:
> > /
> > lspci -nv/
> > 00:1b.0 0403: 8086:293e (rev 03)
> > Subsystem: 103c:30f4
> > Flags: bus master, fast devsel, latency 0, IRQ 22
> > Memory at df300000 (64-bit, non-prefetchable) [size=16K]
> > Capabilities: [50] Power Management version 2
> > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> > Queue=0/0 Enable+
> > Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
> > Capabilities: [100] Virtual Channel <?>
> > Capabilities: [130] Root Complex Link <?>
> > Kernel driver in use: HDA Intel
> > Kernel modules: snd-hda-intel
> >
> > /
> > cat /proc/asound/cards/
> > 0 [Intel ]: HDA-Intel - HDA Intel
> > HDA Intel at 0xdf300000 irq 22
> >
> >
> > /head -n 1 /proc/asound/card0/codec*/
> > ==> /proc/asound/card0/codec#0 <==
> > Codec: IDT 92HD71B7X
> > ==> /proc/asound/card0/codec#2 <==
> > Codec: Generic 10de ID 6
> >
> >
> > I'm using openSuse 11.0 with Kernel 2.6.25.16-0.1-pae.
> > Maybe your project could develop some drivers.
BEGIN:VCARD
VERSION:2.1
N:Horn;Ronald;;;
FN:Ronald Horn
EMAIL;INTERNET:ronald.horn@xxxxxx
END:VCARD
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
