Hi, I'm a maintainer of both ALSA firewire stack and Linux firewire subsystem. As long as I know, there is neither consensus nor specific userspace API/structure to the issue , therefore each developer selects each way within current implementation of ALSA control core and userspace interface. On Mon, Jul 1, 2024, at 01:04, Asahi Lina wrote: > The problem is that the device has a 66x34 matrix mixer, with up to 2048 > cross points enabled at once. Exposing each cross point as an ALSA mixer > control (similar to how mixer_scarlett2.c does it) would mean 2244 > controls just for the mixer... which seems like a bit too much. > > On top of that there is also VU meter feedback for all the > inputs/outputs, as well as general fader controls for each output and > global output configs and status. I'm not sure about the VU meters, but > everything else sounds like it would map fine to normal mixer controls. > > Is there some recommended way to expose this kind of matrix mixer > interface to userspace? I think for something like this you pretty much > have to rely on device-specific tools to make the UX manageable, so > maybe hwdep... but at least exposing everything as an ALSA control would > have the advantage of supporting save/restore with something like > alsactl. So I don't really know what's the way to go here. In my opinion, expose of such many control elements would not be necessarily convenient to users, especially to who eager to use GUI for such matrix mixer. Additionally, initialization for all of configurable elements in device would sometimes require conditional operation somehow (e.g. dependency on sampling rate or any mode of digital interfaces). If you have no need to share one of the USB endpoints for any configurable elemenets between kernel/userspace, it is a simple way to implement such confuguration application as userspace application, as you did with Python 3 and libusb. Anyway, if you eager to change ALSA control core and its interface to userspace for the purpose, we go for more discussion about it. We share the same interest. P.S. for devices supported by drivers in ALSA firewire stack, I write some service programs in userspace to utilize ALSA control "user-defined control element set". You can find the implementation of protocol to configure RME Fireface 400/800/UCX/808 in it, as well as any DICE-based models: * https://github.com/alsa-project/snd-firewire-ctl-services/ Regards Takashi Sakamoto
