Some of the signals are multiplexed, multiplexer configured at a signal
request.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
---
Changes for v3:
- Split previous commit for separate subsystems
- Add pl08x virtual dma channels for i2s1
- Add dma mux handling, required when requesting tx dma signal for i2s1
arch/arm/mach-lpc32xx/phy3250.c | 111 +++++++++++++++++++++++++++++++-
1 file changed, 110 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 5371bfaed799..2ec0411964f9 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -9,14 +9,18 @@
*/
#include <linux/amba/pl08x.h>
+#include <linux/amba/pl022.h>
#include <linux/mtd/lpc32xx_mlc.h>
#include <linux/mtd/lpc32xx_slc.h>
#include <linux/of_platform.h>
+#include <linux/spinlock.h>
#include <asm/mach/arch.h>
#include "common.h"
#include "lpc32xx.h"
+static DEFINE_SPINLOCK(lpc32xx_pl08x_lock);
+
static struct pl08x_channel_data pl08x_slave_channels[] = {
{
.bus_id = "nand-slc",
@@ -30,11 +34,97 @@ static struct pl08x_channel_data pl08x_slave_channels[] = {
.max_signal = 12,
.periph_buses = PL08X_AHB1,
},
+ {
+ .bus_id = "i2s0-tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "i2s0-rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "i2s1-tx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "i2s1-rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp0-tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp0-rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp1-tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp1-rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+};
+
+struct lpc32xx_pl08x_mux {
+ int signal;
+ void __iomem *addr;
+ int bit;
+};
+
+/* From LPC32x0 User manual "3.2.1 DMA request signals" */
+static const struct lpc32xx_pl08x_mux dma_mux[] = {
+ {3, LPC32XX_CLKPWR_SSP_CLK_CTRL, 5},
+ {10, LPC32XX_CLKPWR_I2S_CLK_CTRL, 4},
+ {11, LPC32XX_CLKPWR_SSP_CLK_CTRL, 4},
+ {14, LPC32XX_CLKPWR_SSP_CLK_CTRL, 3},
+ {15, LPC32XX_CLKPWR_SSP_CLK_CTRL, 2},
};
static int pl08x_get_signal(const struct pl08x_channel_data *cd)
{
- return cd->min_signal;
+ const int signal = cd->min_signal;
+ unsigned long flags;
+ int i, tmp;
+
+ /* Set corresponding dma mux bit if muxed */
+ for (i = 0; i < ARRAY_SIZE(dma_mux); i++) {
+ if (dma_mux[i].signal == signal) {
+ spin_lock_irqsave(&lpc32xx_pl08x_lock, flags);
+ tmp = __raw_readl(dma_mux[i].addr);
+ if (cd->muxval)
+ tmp |= BIT(dma_mux[i].bit);
+ else
+ tmp &= ~BIT(dma_mux[i].bit);
+ __raw_writel(tmp, dma_mux[i].addr);
+ spin_unlock_irqrestore(&lpc32xx_pl08x_lock, flags);
+ break;
+ }
+ }
+ return signal;
}
static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
@@ -61,12 +151,31 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
.dma_filter = pl08x_filter_id,
};
+static struct pl022_ssp_controller lpc32xx_ssp_data[] = {
+ {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp0-tx",
+ .dma_rx_param = "ssp0-rx",
+ },
+ {
+ .bus_id = 1,
+ .enable_dma = 0,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp1-tx",
+ .dma_rx_param = "ssp1-rx",
+ }
+};
+
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
&lpc32xx_slc_data),
OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
&lpc32xx_mlc_data),
+ OF_DEV_AUXDATA("arm,pl022", 0x20084000, NULL, &lpc32xx_ssp_data[0]),
+ OF_DEV_AUXDATA("arm,pl022", 0x2008c000, NULL, &lpc32xx_ssp_data[1]),
{ }
};
--
2.25.1
