I2S clock generation registers should be programmed before starting the I2S dma when I2S controller is programmed as clock master. Move i2s clock generation register programming sequence prior to i2s dma start. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@xxxxxxx> --- sound/soc/amd/acp/acp-i2s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/amd/acp/acp-i2s.c b/sound/soc/amd/acp/acp-i2s.c index 7da414bc3b96..88985e9d318b 100644 --- a/sound/soc/amd/acp/acp-i2s.c +++ b/sound/soc/amd/acp/acp-i2s.c @@ -369,12 +369,12 @@ static int acp_i2s_trigger(struct snd_pcm_substream *substream, int cmd, struct } writel(period_bytes, adata->acp_base + water_val); writel(buf_size, adata->acp_base + buf_reg); + if (rsrc->soc_mclk) + acp_set_i2s_clk(adata, dai->driver->id); val = readl(adata->acp_base + reg_val); val = val | BIT(0); writel(val, adata->acp_base + reg_val); writel(1, adata->acp_base + ier_val); - if (rsrc->soc_mclk) - acp_set_i2s_clk(adata, dai->driver->id); return 0; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: -- 2.34.1
