Re: [PATCH v6 3/7] ASoC: codecs: wcd937x: add wcd937x codec driver - another comment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 11/06/2024 à 09:45, Mohammad Rafi Shaik a écrit :
From: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>

This patch adds basic SoundWire codec driver to support for
WCD9370/WCD9375 TX and RX devices.

The WCD9370/WCD9375 has Multi Button Headset Control hardware to
support Headset insertion, type detection, 8 headset buttons detection,
Over Current detection and Impedence measurements.
This patch adds support for this using wcd-mbhc apis.

Co-developed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
---


Hi,

this patch has reached -next, but I have a question.

If I'm correct, I can send a patch, but if the fix can be folded somewhere, this is also fine for me.

...

+static int wcd937x_probe(struct platform_device *pdev)
+{
+	struct component_match *match = NULL;
+	struct device *dev = &pdev->dev;
+	struct wcd937x_priv *wcd937x;
+	struct wcd_mbhc_config *cfg;
+	int ret;
+
+	wcd937x = devm_kzalloc(dev, sizeof(*wcd937x), GFP_KERNEL);
+	if (!wcd937x)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, wcd937x);
+	mutex_init(&wcd937x->micb_lock);
+
+	wcd937x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(wcd937x->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(wcd937x->reset_gpio),
+				     "failed to reset wcd gpio\n");
+
+	wcd937x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro", GPIOD_OUT_LOW);
+	if (IS_ERR(wcd937x->us_euro_gpio))
+		return dev_err_probe(dev, PTR_ERR(wcd937x->us_euro_gpio),
+				"us-euro swap Control GPIO not found\n");
+
+	cfg = &wcd937x->mbhc_cfg;
+	cfg->swap_gnd_mic = wcd937x_swap_gnd_mic;
+
+	wcd937x->supplies[0].supply = "vdd-rxtx";
+	wcd937x->supplies[1].supply = "vdd-px";
+	wcd937x->supplies[2].supply = "vdd-mic-bias";
+
+	ret = devm_regulator_bulk_get(dev, WCD937X_MAX_BULK_SUPPLY, wcd937x->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get supplies\n");
+
+	ret = regulator_bulk_enable(WCD937X_MAX_BULK_SUPPLY, wcd937x->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable supplies\n");
+
+	/* Get the buck separately, as it needs special handling */
+	wcd937x->buck_supply = devm_regulator_get(dev, "vdd-buck");
+	if (IS_ERR(wcd937x->buck_supply))

regulator_bulk_disable() is missing here...

+		return dev_err_probe(dev, PTR_ERR(wcd937x->buck_supply),
+				     "Failed to get buck supply\n");
+
+	ret = regulator_enable(wcd937x->buck_supply);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable buck supply\n");

... and here...

Also, should 'buck_supply' be disabled in the error handling path of the probe and in the remove function? (and maybe even somewhere else related to wcd937x_codec_enable_vdd_buck())

+
+	wcd937x_dt_parse_micbias_info(dev, wcd937x);
+
+	cfg->mbhc_micbias = MIC_BIAS_2;
+	cfg->anc_micbias = MIC_BIAS_2;
+	cfg->v_hs_max = WCD_MBHC_HS_V_MAX;
+	cfg->num_btn = WCD937X_MBHC_MAX_BUTTONS;
+	cfg->micb_mv = wcd937x->micb2_mv;
+	cfg->linein_th = 5000;
+	cfg->hs_thr = 1700;
+	cfg->hph_thr = 50;
+
+	wcd_dt_parse_mbhc_data(dev, &wcd937x->mbhc_cfg);
+
+	ret = wcd937x_add_slave_components(wcd937x, dev, &match);
+	if (ret)
+		return ret;

... and here...

+
+	wcd937x_reset(wcd937x);
+
+	ret = component_master_add_with_match(dev, &wcd937x_comp_ops, match);
+	if (ret)
+		return ret;

... and here.

Maybe a devm_add_action_ior_reset() could help?

+
+	pm_runtime_set_autosuspend_delay(dev, 1000);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_idle(dev);
+
+	return ret;
+}
+
+static void wcd937x_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct wcd937x_priv *wcd937x = dev_get_drvdata(dev);
+
+	component_master_del(&pdev->dev, &wcd937x_comp_ops);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+
+	regulator_bulk_disable(WCD937X_MAX_BULK_SUPPLY, wcd937x->supplies);
+	regulator_bulk_free(WCD937X_MAX_BULK_SUPPLY, wcd937x->supplies);

This has been allocated with devm_regulator_bulk_get(), so this call looks redundant (but harmless).

+}

...




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux