Re: [PATCH v23 32/32] ASoC: doc: Add documentation for SOC USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/11/2024 1:58 AM, Wesley Cheng wrote:

(...)

+In the case where the USB offload driver is unbounded, while USB SND is

unbounded -> unbound

(...)

+SOC USB and USB Sound Kcontrols
+===============================
+Details
+-------
+SOC USB and USB sound expose a set of SND kcontrols for applications to select
+and fetch the current offloading status for the ASoC platform sound card. Kcontrols
+are split between two layers:
+
+	- USB sound - Notifies the sound card number for the ASoC platform sound
+	  card that it is registered to for supporting audio offload.
+
+	- SOC USB - Maintains the current status of the offload path, and device
+	  (USB sound card and PCM device) information.  This would be the main
+	  card that applications can read to determine offloading capabilities.
+
+Implementation
+--------------
+
+**Example:**
+
+  **Sound Cards**:
+
+	::
+
+	  0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D
+                     SM8250-MTP-WCD9380-WSA8810-VA-DMIC
+	  1 [C320M          ]: USB-Audio - Plantronics C320-M
+                     Plantronics Plantronics C320-M at usb-xhci-hcd.1.auto-1, full speed
+
+
+  **Platform Sound Card** - card#0:
+
+	::
+
+	  USB Offload Playback Route Card Select  1 (range -1->32)
+	  USB Offload Playback Route PCM Select   0 (range -1->255)
+	  USB Offload Playback Route Card Status  -1 (range -1->32)
+	  USB Offload Playback Route PCM Status   -1 (range -1->255)
+
+
+  **USB Sound Card** - card#1:
+
+	::
+
+	  USB Offload Playback Capable Card         0 (range -1->32)
+
+
+The platform sound card(card#0) kcontrols are created as part of adding the SOC
+USB device using **snd_soc_usb_add_port()**.  The following kcontrols are defined
+as:
+
+  - ``USB Offload Playback Route Card Status`` **(R)**: USB sound card device index
+    that defines which USB SND resources are currently offloaded.  If -1 is seen, it
+    signifies that offload is not active.
+  - ``USB Offload Playback Route PCM Status`` **(R)**: USB PCM device index
+    that defines which USB SND resources are currently offloaded.  If -1 is seen, it
+    signifies that offload is not active.
+  - ``USB Offload Playback Route Card Select`` **(R/W)**: USB sound card index which
+    selects the USB device to initiate offloading on.  If no value is written to the
+    kcontrol, then the last USB device discovered card index will be chosen.

I see only one kcontrol, what if hardware is capable of offloading on more cards, is it possible to do offloading on more than one device?

+  - ``USB Offload Playback Route PCM Select`` **(R/W)**: USB PCM index which selects
+    the USB device to initiate offloading on.  If no value is written to the
+    kcontrol, then the last USB device discovered PCM zero index will be chosen.
+
+The USB sound card(card#1) kcontrols are created as USB audio devices are plugged
+into the physical USB port and enumerated.  The kcontrols are defined as:
+
+  - ``USB Offload Playback Capable Card`` **(R)**: Provides the sound card
+    number/index that supports USB offloading.  Further/follow up queries about
+    the current offload state can be handled by reading the offload status
+    kcontrol exposed by the platform card.
+


Why do we need to some magic between cards? I feel like whole kcontrol thing is overengineered a bit - I'm not sure I understand the need to do linking between cards. It would feel a lot simpler if USB card exposed one "USB Offload" kcontrol on USB card if USB controller supports offloading and allowed to set it to true/false to allow user to choose if they want to do offloading on device.

(...)
+Mixer Examples
+--------------
+
+	::
+
+	  tinymix -D 0 set 'USB Offload Playback Route Card Select' 2
+	  tinymix -D 0 set 'USB Offload Playback Route PCM Select' 0
+
+
+	::
+
+	  tinymix -D 0 get 'USB Offload Playback Route Card Select'
+	  --> 2 (range -1->32)
+	  tinymix -D 0 get 'USB Offload Playback Route PCM Select'
+	  --> 0 (range -1->255)
+
+	::
+
+	  tinymix -D 0 get 'USB Offload Playback Route Card Status'
+	  --> 2 (range -1->32)   [OFFLD active]
+	  --> -1 (range -1->32) [OFFLD idle]
+	  tinymix -D 0 get 'USB Offload Playback Route PCM Status'
+	  --> 0 (range -1->255)   [OFFLD active]
+	  --> -1 (range -1->255) [OFFLD idle]
+
+	::
+
+	  tinymix -D 1 get 'USB Offload Playback Capable Card'
+	  --> 0 (range -1->32)


Yes, looking at examples again, I'm still not sure I understand. There are two cards and you do linking between them, this feels broken by design. From my point of view USB Offload should be property of USB card and not involve any other card in a system.




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux