From: Rob Sims <openmoko-z@xxxxxxxxxxx>
Rob Sims wrote:
"I can't seem to turn on register 0x17, bit 3 in the sound chip, except
by codec_reg_write; the mixer lacks direct or indirect control. It
seems there are two names for the output of the rec mixer:
Capture ST Mixer
Playback Mixer
Would the following do the trick?"
I confirm that this solves the audio problems I was having.
Signed-off-by: Jonas Bonn <jonas.bonn@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
This is a bugfix which could be applied to 2.6.27 - without it the
WM8753 driver will fail to set up some audio paths.
sound/soc/codecs/wm8753.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index b3e1b37..8c4df44 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -583,7 +583,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
/* out 4 */
{"Out4 Mux", "VREF", "VREF"},
- {"Out4 Mux", "Capture ST", "Capture ST Mixer"},
+ {"Out4 Mux", "Capture ST", "Playback Mixer"},
{"Out4 Mux", "LOUT2", "LOUT2"},
{"Out 4", NULL, "Out4 Mux"},
{"OUT4", NULL, "Out 4"},
@@ -607,7 +607,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
/* Capture Right Mux */
{"Capture Right Mux", "PGA", "Right Capture Volume"},
{"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"},
- {"Capture Right Mux", "Sidetone", "Capture ST Mixer"},
+ {"Capture Right Mux", "Sidetone", "Playback Mixer"},
/* Mono Capture mixer-mux */
{"Capture Right Mixer", "Stereo", "Capture Right Mux"},
--
1.5.6.5
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
