Add properties for configuring the MICBIAS pins as general purpose
outputs, with some limitations: The voltage on the pin when activated
may be set using another property to 2.0 V, 2.5 V or AVDD.
When deactivated the pin will float.
Signed-off-by: Ricard Wanderlof <ricard.wanderlof@xxxxxxxx>
---
.../devicetree/bindings/sound/ti,tlv320adc3xxx.yaml | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
index ede14ca2c07a..4172aced1386 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
@@ -82,6 +82,26 @@ properties:
Note that there is currently no support for reading the GPIO pins as
inputs.
+ ti,micbias1-gpo:
+ type: boolean
+ description: |
+ When set, the MICBIAS1 pin may be controlled via the GPIO framework,
+ as pin number 3 on the device.
+
+ In this mode, when the pin is activated, it will be set to the voltage
+ specified by the ti,micbias1-vg property. When deactivated, the pin will
+ float.
+
+ ti,micbias2-gpo:
+ type: boolean
+ description: |
+ When set, the MICBIAS2 pin may be controlled via the GPIO framework,
+ as pin number 4 on the device.
+
+ In this mode, when the pin is activated, it will be set to the voltage
+ specified by the ti,micbias1-vg property. When deactivated, the pin will
+ float.
+
ti,micbias1-vg:
$ref: /schemas/types.yaml#/definitions/uint32
enum:
--
2.30.2
