In the schematics, the MCLK2 pin is shown as connected to CODEC_CLK32K, which is derived from the same 32KHZ_PMIC clock as Bluetooth/WiFi and GPS clocks. 32KHZ_PMIC is connected to the BTCLK pin, represented in mainline as S2MPS11_CLK_BT. Add the MCLK2 clock to the WM1811 codec clock property to properly describe the hardware. Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> --- Changes in v3: - Split out from "[PATCH v2 7/7] ARM: dts: samsung: exynos4212-tab3: Fix up wm1811 codec config" --- arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi index 8dc81112172c..47e9a230f2e8 100644 --- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi @@ -529,8 +529,9 @@ &i2c_4 { wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clocks = <&pmu_system_controller 0>, + <&s5m8767_osc S2MPS11_CLK_BT>; + clock-names = "MCLK1", "MCLK2"; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&gpx3>; -- 2.45.0