When there are 'pll8k' and 'pll11k' clock existing, the clock source of 'phy_clk' can be changed for different sample rate requirement. Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx> --- sound/soc/fsl/fsl_xcvr.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index c46f64557a7f..0ffa10e924ef 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -15,6 +15,7 @@ #include <sound/pcm_params.h> #include "fsl_xcvr.h" +#include "fsl_utils.h" #include "imx-pcm.h" #define FSL_XCVR_CAPDS_SIZE 256 @@ -33,6 +34,8 @@ struct fsl_xcvr { struct clk *pll_ipg_clk; struct clk *phy_clk; struct clk *spba_clk; + struct clk *pll8k_clk; + struct clk *pll11k_clk; struct reset_control *reset; u8 streams; u32 mode; @@ -362,6 +365,8 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq) freq = xcvr->soc_data->spdif_only ? freq / 5 : freq; clk_disable_unprepare(xcvr->phy_clk); + fsl_asoc_reparent_pll_clocks(dev, xcvr->phy_clk, + xcvr->pll8k_clk, xcvr->pll11k_clk, freq); ret = clk_set_rate(xcvr->phy_clk, freq); if (ret < 0) { dev_err(dev, "Error while setting AUD PLL rate: %d\n", ret); @@ -1287,6 +1292,9 @@ static int fsl_xcvr_probe(struct platform_device *pdev) return PTR_ERR(xcvr->pll_ipg_clk); } + fsl_asoc_get_pll_clocks(dev, &xcvr->pll8k_clk, + &xcvr->pll11k_clk); + xcvr->ram_addr = devm_platform_ioremap_resource_byname(pdev, "ram"); if (IS_ERR(xcvr->ram_addr)) return PTR_ERR(xcvr->ram_addr); -- 2.34.1