There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_timeout() causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Fix to the proper variable type 'unsigned long' while here. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- sound/soc/codecs/wm8993.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index 5b788f35e5e4..dcc6301223bc 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -470,7 +470,7 @@ static int _wm8993_set_fll(struct snd_soc_component *component, int fll_id, int struct i2c_client *i2c = to_i2c_client(component->dev); u16 reg1, reg4, reg5; struct _fll_div fll_div; - unsigned int timeout; + unsigned long time_left; int ret; /* Any change? */ @@ -543,19 +543,19 @@ static int _wm8993_set_fll(struct snd_soc_component *component, int fll_id, int /* If we've got an interrupt wired up make sure we get it */ if (i2c->irq) - timeout = msecs_to_jiffies(20); + time_left = msecs_to_jiffies(20); else if (Fref < 1000000) - timeout = msecs_to_jiffies(3); + time_left = msecs_to_jiffies(3); else - timeout = msecs_to_jiffies(1); + time_left = msecs_to_jiffies(1); try_wait_for_completion(&wm8993->fll_lock); /* Enable the FLL */ snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA); - timeout = wait_for_completion_timeout(&wm8993->fll_lock, timeout); - if (i2c->irq && !timeout) + time_left = wait_for_completion_timeout(&wm8993->fll_lock, time_left); + if (i2c->irq && !time_left) dev_warn(component->dev, "Timed out waiting for FLL\n"); dev_dbg(component->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); -- 2.43.0
