On Thu, 25 Apr 2024 14:48:51 +0530, Mohammad Rafi Shaik wrote: > From: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx> > > Document the Qualcomm WCD9370/WCD9375 Audio Codec and the soundwire > devices can be found on Qualcomm QCM6490 based platforms. > > The Qualcomm WCD9370/WCD9375 Audio Codec communicates > with the host SoC over 2 Soundwire links to provide: > - 3 TX ADC paths with 4 differential AMIC inputs > - 6 DMIC inputs that are shared with AMIC input > - 4 Microphone BIAS > - RX paths with 4 PAs – HPHL/R, EAR and AUX > - Stereo Headphone output > - MBHC engine for Headset Detection > > Co-developed-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx> > Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx> > Signed-off-by: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx> > --- > .../bindings/sound/qcom,wcd937x-sdw.yaml | 78 +++++++++++++++++++ > .../bindings/sound/qcom,wcd937x.yaml | 58 ++++++++++++++ > 2 files changed, 136 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml > create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml:30:11: [warning] wrong indentation: expected 4 but found 10 (indentation) ./Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml:34:13: [warning] wrong indentation: expected 6 but found 12 (indentation) ./Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml:34:17: [warning] too many spaces before colon (colons) ./Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml:46:13: [warning] wrong indentation: expected 6 but found 12 (indentation) ./Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml:46:17: [warning] too many spaces before colon (colons) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,wcd937x.example.dtb: codec: compatible:0: 'sdw20217010a00' was expected from schema $id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,wcd937x.example.dtb: codec: 'reg' is a required property from schema $id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,wcd937x.example.dtb: codec: '#sound-dai-cells', 'qcom,micbias1-microvolt', 'qcom,micbias2-microvolt', 'qcom,micbias3-microvolt', 'qcom,micbias4-microvolt', 'qcom,rx-device', 'qcom,tx-device', 'reset-gpios', 'vdd-buck-supply', 'vdd-mic-bias-supply', 'vdd-px-supply', 'vdd-rxtx-supply' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240425091857.2161088-2-quic_mohs@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
