Re: [PATCH v2 1/8] ASoC: dt-bindings: wcd937x: add bindings for wcd937x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/17/2024 9:21 PM, Krzysztof Kozlowski wrote:
On 16/04/2024 08:35, Mohammad Rafi Shaik wrote:
From: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>

Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire device RX and
TX respectively, supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
6 DMICs, MBHC.

Co-developed-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>
---
  .../bindings/sound/qcom,wcd937x.yaml          | 119 ++++++++++++++++++
  1 file changed, 119 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml
new file mode 100644
index 000000000000..b45f823af04f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml

No wildcards. This is wcd9370, right?

@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9370 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
+
+description: |

Do not need '|' unless you need to preserve formatting.

ACK

will remove '|' in next version patch set.


+  Qualcomm WCD9370 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices.
+
+properties:
+  compatible:
+    enum:
+      - qcom,wcd9370-codec

Can it be anything else than codec?

+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-px-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
+  qcom,tx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire tx device phandle

"A reference to phandle" is not correct. Phandle is the reference.
Anyway, both are redundant.


ACK,


+  qcom,rx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire rx device phandle
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reset-gpios
+  - qcom,tx-device
+  - qcom,rx-device
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false

This does not make sense without ref to dai-common, so this should point
you to missing ref.

ACK,

Will add missing dai-common reference.

+
+examples:
+  - |
+    codec {
+        compatible = "qcom,wcd9370-codec";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&wcd_reset_n>;
+        pinctrl-1 = <&wcd_reset_n_sleep>;
+        reset-gpios = <&tlmm 83 0>;
+        vdd-buck-supply = <&vreg_l17b_1p8>;
+        vdd-rxtx-supply = <&vreg_l18b_1p8>;
+        vdd-px-supply = <&vreg_l18b_1p8>;
+        vdd-mic-bias-supply = <&vreg_bob>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,rx-device = <&wcd937x_rx>;
+        qcom,tx-device = <&wcd937x_tx>;
+        #sound-dai-cells = <1>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        #address-cells = <2>;

Drop this and other nodes.

Best regards,
Krzysztof

ACK,

will use the qcom,wcd93xx-common.yaml file and will drop the common duplicate nodes

Thanks and Regards,
Rafi





[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux