From: Joao Paulo Goncalves <joao.goncalves@xxxxxxxxxxx>
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 9fbd58cf4ab0 ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@xxxxxxxxxxx>
---
sound/soc/ti/davinci-mcasp.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c
index b892d66f78470..1e760c3155213 100644
--- a/sound/soc/ti/davinci-mcasp.c
+++ b/sound/soc/ti/davinci-mcasp.c
@@ -2417,12 +2417,6 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
mcasp_reparent_fck(pdev);
- ret = devm_snd_soc_register_component(&pdev->dev, &davinci_mcasp_component,
- &davinci_mcasp_dai[mcasp->op_mode], 1);
-
- if (ret != 0)
- goto err;
-
ret = davinci_mcasp_get_dma_type(mcasp);
switch (ret) {
case PCM_EDMA:
@@ -2449,6 +2443,12 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
goto err;
}
+ ret = devm_snd_soc_register_component(&pdev->dev, &davinci_mcasp_component,
+ &davinci_mcasp_dai[mcasp->op_mode], 1);
+
+ if (ret != 0)
+ goto err;
+
no_audio:
ret = davinci_mcasp_init_gpiochip(mcasp);
if (ret) {
--
2.34.1
