Integrate tas2781 configs for HP Laptops. Every tas2781 in the laptop will work as a single speaker on SPI bus. The code support realtek as the primary codec. Signed-off-by: Baojun Xu <baojun.xu@xxxxxx> --- - Change depends on SPI to SPI_MASTER in sound/pci/hda/Kconfig - Add select SND_HDA_SCODEC_COMPONENT in sound/pci/hda/Kconfig - Change comp_generic_fixup() 5th parameter from "-%s:00" to "-%s:00-tas2781-hda.%d" in sound/pci/hda/patch_realtek.c - Change chain_id from ALC285_FIXUP_THINKPAD_HEADSET_JACK to ALC285_FIXUP_HP_GPIO_LED in sound/pci/hda/patch_realtek.c - Remove project name "Gemtree" --- drivers/acpi/scan.c | 1 + drivers/platform/x86/serial-multi-instantiate.c | 10 ++++++++++ sound/pci/hda/Kconfig | 15 +++++++++++++++ sound/pci/hda/Makefile | 2 ++ sound/pci/hda/patch_realtek.c | 15 +++++++++++++++ 5 files changed, 43 insertions(+) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 7c157bf92695..8166343f26d0 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1766,6 +1766,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device) {"INT33FE", }, {"INT3515", }, /* Non-conforming _HID for Cirrus Logic already released */ + {"TXNW2781", }, {"CLSA0100", }, {"CLSA0101", }, /* diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c index 97b9c6392230..f54636b576d1 100644 --- a/drivers/platform/x86/serial-multi-instantiate.c +++ b/drivers/platform/x86/serial-multi-instantiate.c @@ -368,6 +368,15 @@ static const struct smi_node cs35l57_hda = { .bus_type = SMI_AUTO_DETECT, }; +static const struct smi_node tas2781_hda = { + .instances = { + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + {} + }, + .bus_type = SMI_AUTO_DETECT, +}; + /* * Note new device-ids must also be added to ignore_serial_bus_ids in * drivers/acpi/scan.c: acpi_device_enumeration_by_parent(). @@ -383,6 +392,7 @@ static const struct acpi_device_id smi_acpi_ids[] = { /* Non-conforming _HID for Cirrus Logic already released */ { "CLSA0100", (unsigned long)&cs35l41_hda }, { "CLSA0101", (unsigned long)&cs35l41_hda }, + { "TXNW2781", (unsigned long)&tas2781_hda }, { } }; MODULE_DEVICE_TABLE(acpi, smi_acpi_ids); diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index f806636242ee..f25ad9ea51d9 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -202,6 +202,21 @@ config SND_HDA_SCODEC_TAS2781_I2C comment "Set to Y if you want auto-loading the side codec driver" depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m +config SND_HDA_SCODEC_TAS2781_SPI + tristate "Build TAS2781 HD-audio side codec support for SPI Bus" + depends on SPI_MASTER + depends on ACPI + depends on EFI + depends on SND_SOC + select SND_HDA_SCODEC_COMPONENT + select CRC32_SARWATE + help + Say Y or M here to include TAS2781 SPI HD-audio side codec support + in snd-hda-intel driver, such as ALC287. + +comment "Set to Y if you want auto-loading the side codec driver" + depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_SPI=m + config SND_HDA_CODEC_REALTEK tristate "Build Realtek HD-audio codec support" select SND_HDA_GENERIC diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 13e04e1f65de..9785cddb4845 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -39,6 +39,7 @@ snd-hda-scodec-cs35l56-spi-objs := cs35l56_hda_spi.o snd-hda-cs-dsp-ctls-objs := hda_cs_dsp_ctl.o snd-hda-scodec-component-objs := hda_component.o snd-hda-scodec-tas2781-i2c-objs := tas2781_hda_i2c.o +snd-hda-scodec-tas2781-spi-objs := tas2781_hda_spi.o tas2781_spi_fwlib.o # common driver obj-$(CONFIG_SND_HDA) := snd-hda-codec.o @@ -70,6 +71,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o obj-$(CONFIG_SND_HDA_SCODEC_COMPONENT) += snd-hda-scodec-component.o obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o +obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_SPI) += snd-hda-scodec-tas2781-spi.o # this must be the last entry after codec drivers; # otherwise the codec patches won't be hooked before the PCI probe diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cdcb28aa9d7b..4945309f45ae 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6913,6 +6913,13 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc, comp_generic_fixup(cdc, action, "i2c", "TIAS2781", "-%s:00", 1); } +static void tas2781_fixup_spi(struct hda_codec *cdc, + const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "spi", "TXNW2781", + "-%s:00-tas2781-hda.%d", 2); +} + static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { @@ -7451,6 +7458,7 @@ enum { ALC236_FIXUP_DELL_DUAL_CODECS, ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI, ALC287_FIXUP_TAS2781_I2C, + ALC245_FIXUP_TAS2781_SPI_2, ALC287_FIXUP_YOGA7_14ARB7_I2C, ALC245_FIXUP_HP_MUTE_LED_COEFBIT, ALC245_FIXUP_HP_X360_MUTE_LEDS, @@ -9614,6 +9622,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK, }, + [ALC245_FIXUP_TAS2781_SPI_2] = { + .type = HDA_FIXUP_FUNC, + .v.func = tas2781_fixup_spi, + .chained = true, + .chain_id = ALC285_FIXUP_HP_GPIO_LED, + }, [ALC287_FIXUP_YOGA7_14ARB7_I2C] = { .type = HDA_FIXUP_FUNC, .v.func = yoga7_14arb7_fixup_i2c, @@ -10038,6 +10052,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8b8d, "HP", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b8f, "HP", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b92, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8b93, "HP", ALC245_FIXUP_TAS2781_SPI_2), SND_PCI_QUIRK(0x103c, 0x8b96, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8b97, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8bdd, "HP Envy 17", ALC287_FIXUP_CS35L41_I2C_2), -- 2.40.1