From: Derek Fang <derek.fang@xxxxxxxxxxx>
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.
Signed-off-by: Derek Fang <derek.fang@xxxxxxxxxxx>
diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1f..c1fa379f5f3e 100644
--- a/Documentation/devicetree/bindings/sound/rt5645.txt
+++ b/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
a GPIO spec for the external headphone detect pin. If jd-mode = 0,
we will get the JD status by getting the value of hp-detect-gpios.
+- cbj-sleeve-gpios:
+ a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+ contacts to the ground or floating. It could avoid some electric noise from the
+ active speaker jacks.
+
- realtek,in2-differential
Boolean. Indicate MIC2 input are differential, rather than single-ended.
@@ -68,6 +73,7 @@ codec: rt5650@1a {
compatible = "realtek,rt5650";
reg = <0x1a>;
hp-detect-gpios = <&gpio 19 0>;
+ cbj-sleeve-gpios = <&gpio 20 0>;
interrupt-parent = <&gpio>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
realtek,dmic-en = "true";
--
2.34.1
