This series aims to add some features to McBSP driver.
Convert bindings from .txt to .yaml.
Add possibility to use an external clock as sample rate generator's
input.
Add handling of new formats (TDM, S24_LE, BP_FC).
Enable the detection of unexpected frame pulses.
Set the clock free-running mode according to SND_SOC_DAIFMT_[GATED/CONT]
configuration in DAI format.
Add ti,T1-framing[tx/rx] properties in DT. They allow to set the data
delay to two bit-clock periods.
This has been tested on a platform designed off of the DAVINCI/OMAP-L138
connected to 3 daisy-chained AD7767. An external clock drives the
sample rate generator through the CLKS pin.
The hardware I have only allowed me to test acquisition side of McBSP.
It is connected to a 6 channels TDM and acts as Bit clock provider and
Frame clock consumer.
Change log v1 -> v2:
PATCH 1 (bindings):
* Drop power-domains property's description
* Drop the unused label 'mcbsp0' in example
* Add <> around each entry of the 'dmas' property
* Add 'Reviewed-by: Rob Herring <robh@xxxxxxxxxx>'
PATCH 2 (bindings):
* Drop the 'ti,enable-sync-err' flag
* Drop the 'ti,disable-free-run' flag
* Add 'Reviewed-by: Rob Herring <robh@xxxxxxxxxx>'
PATCH 4:
* In probe() use dev_err for fixed error
PATCH 7 (TDM):
* set playback.max_channels to 128
* Add a check on tx_mask as the one done for rx_mask
* Allow TDM with BP_FP format
PATCH 9:
* Detection of unexpected frame pulses is enabled by default
PATCH 10:
* Free-running mode is selected by the DAI format through
SND_SOC_DAIFMT_[CONT/GATED]
PATCH 12:
* drop the 'ti,drive-dx' property
* add 'ti,T1-framing-[rx/tx]' properties
PATCH 13:
* Drop the drive_dx part
* Add support for 'T1 framing' with data delay set to 2 bit-clock
periods
Bastien Curutchet (13):
ASoC: dt-bindings: davinci-mcbsp: convert McBSP bindings to yaml
schema
ASoC: dt-bindings: davinci-mcbsp: Add optional clock
ASoC: ti: davinci-i2s: Remove the unused clk_input_pin attribute
ASoC: ti: davinci-i2s: Replace dev_err with dev_err_probe
ASoC: ti: davinci-i2s: Use external clock to drive sample rate
generator
ASoC: ti: davinci-i2s: Delete unnecessary assignment
ASoC: ti: davinci-i2s: Add TDM support
ASoC: ti: davinci-i2s: Add handling of BP_FC format
ASoC: ti: davinci-i2s: Enable unexpected frame pulses detection
ASoC: ti: davinci-i2s: Link free-run mode to
SND_SOC_DAIFMT_[GATED/CONT]
ASoC: ti: davinci-i2s: Add S24_LE to supported formats
ASoC: dt-bindings: davinci-mcbsp: Add the 'ti,T1-framing-{rx/tx}'
flags
ASoC: ti: davinci-i2s: Add T1 framing support
.../bindings/sound/davinci-mcbsp.txt | 50 ----
.../bindings/sound/davinci-mcbsp.yaml | 113 +++++++
include/linux/platform_data/davinci_asp.h | 15 -
sound/soc/ti/davinci-i2s.c | 278 ++++++++++++++----
4 files changed, 333 insertions(+), 123 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml
--
2.44.0
