Before ACP firmware loading, DSP interrupts are not expected. Sometimes after reboot, it's observed that before ACP firmware is loaded false DSP interrupt is reported. Registering the interrupt handler before acp initialization causing false interrupts sometimes on reboot as ACP reset is not applied. Correct the sequence by invoking acp initialization sequence prior to registering interrupt handler. Fixes: 738a2b5e2cc9 ("ASoC: SOF: amd: Add IPC support for ACP IP block") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@xxxxxxx> --- sound/soc/sof/amd/acp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/sof/amd/acp.c b/sound/soc/sof/amd/acp.c index be7dc1e02284..c12c7f820529 100644 --- a/sound/soc/sof/amd/acp.c +++ b/sound/soc/sof/amd/acp.c @@ -704,6 +704,10 @@ int amd_sof_acp_probe(struct snd_sof_dev *sdev) goto unregister_dev; } + ret = acp_init(sdev); + if (ret < 0) + goto free_smn_dev; + sdev->ipc_irq = pci->irq; ret = request_threaded_irq(sdev->ipc_irq, acp_irq_handler, acp_irq_thread, IRQF_SHARED, "AudioDSP", sdev); @@ -713,10 +717,6 @@ int amd_sof_acp_probe(struct snd_sof_dev *sdev) goto free_smn_dev; } - ret = acp_init(sdev); - if (ret < 0) - goto free_ipc_irq; - /* scan SoundWire capabilities exposed by DSDT */ ret = acp_sof_scan_sdw_devices(sdev, chip->sdw_acpi_dev_addr); if (ret < 0) { -- 2.34.1