Adding the ACPI HIDs to the match table triggers the cs35l56-hda modules to be loaded on boot so that Serial Multi Instantiate can add the devices to the bus and begin the driver init sequence. Signed-off-by: Simon Trimmer <simont@xxxxxxxxxxxxxxxxxxxxx> Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") --- sound/pci/hda/cs35l56_hda_i2c.c | 13 +++++++++++-- sound/pci/hda/cs35l56_hda_spi.c | 13 +++++++++++-- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/cs35l56_hda_i2c.c b/sound/pci/hda/cs35l56_hda_i2c.c index 13beee807308..40f2f97944d5 100644 --- a/sound/pci/hda/cs35l56_hda_i2c.c +++ b/sound/pci/hda/cs35l56_hda_i2c.c @@ -56,10 +56,19 @@ static const struct i2c_device_id cs35l56_hda_i2c_id[] = { {} }; +static const struct acpi_device_id cs35l56_acpi_hda_match[] = { + { "CSC3554", 0 }, + { "CSC3556", 0 }, + { "CSC3557", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, cs35l56_acpi_hda_match); + static struct i2c_driver cs35l56_hda_i2c_driver = { .driver = { - .name = "cs35l56-hda", - .pm = &cs35l56_hda_pm_ops, + .name = "cs35l56-hda", + .acpi_match_table = cs35l56_acpi_hda_match, + .pm = &cs35l56_hda_pm_ops, }, .id_table = cs35l56_hda_i2c_id, .probe = cs35l56_hda_i2c_probe, diff --git a/sound/pci/hda/cs35l56_hda_spi.c b/sound/pci/hda/cs35l56_hda_spi.c index a3b2fa76663d..7f02155fe61e 100644 --- a/sound/pci/hda/cs35l56_hda_spi.c +++ b/sound/pci/hda/cs35l56_hda_spi.c @@ -56,10 +56,19 @@ static const struct spi_device_id cs35l56_hda_spi_id[] = { {} }; +static const struct acpi_device_id cs35l56_acpi_hda_match[] = { + { "CSC3554", 0 }, + { "CSC3556", 0 }, + { "CSC3557", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, cs35l56_acpi_hda_match); + static struct spi_driver cs35l56_hda_spi_driver = { .driver = { - .name = "cs35l56-hda", - .pm = &cs35l56_hda_pm_ops, + .name = "cs35l56-hda", + .acpi_match_table = cs35l56_acpi_hda_match, + .pm = &cs35l56_hda_pm_ops, }, .id_table = cs35l56_hda_spi_id, .probe = cs35l56_hda_spi_probe, -- 2.34.1