Rob Herring 於 3/4/2024 9:37 PM 寫道:
CAUTION - External Email: Do not click links or open attachments unless you acknowledge the sender and content.
On Mon, Mar 04, 2024 at 06:15:22PM +0800, Seven Lee wrote:
Added a DT schema for describing nau8325 audio amplifiers.
Present tense: Add a ...
Please say more about this device. Features, link to datasheet, etc.
okay. I will.
Signed-off-by: Seven Lee <wtli@xxxxxxxxxxx>
---
.../bindings/sound/nuvoton,nau8325.yaml | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100755 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml
Schemas aren't executable. checkpatch.pl will tell you this.
okay, I will use the checkpatch.pl.
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml
new file mode 100755
index 000000000000..297d29462812
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8325 audio Amplifier
+
+maintainers:
+ - Seven Lee <WTLI@xxxxxxxxxxx>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: nuvoton,nau8325
+
+ reg:
+ maxItems: 1
+
+ nuvoton,vref-impedance:
+ description:
+ VREF impedance selection.
+ enum: ["Open", "25kOhm", "125kOhm", "2.5kOhm"]
Use standard units (-ohms), not strings. For "open", just omit the
property.
okay, I will.
+
+
+ nuvoton,dac-vref:
+ description: DAC Reference Voltage Setting.
+ enum: ["External VDDA", "1.5V", "1.6V", "1.7V"]
Use standard units.
okay, I will use standard units.
+
+
+ nuvoton,alc-enable:
+ description:
+ Enable digital automatic level control (ALC) function.
+ type: boolean
+
+ nuvoton,clock-detection-disable:
+ description:
+ When clock detection is enabled, it will detect whether MCLK
+ and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
+ FS range is from 8kHz to 96kHz. And also needs to detect the ratio
+ MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
+ to make sure data is present. There needs to be at least 8 BCLK
+ cycles per Frame Sync.
+ type: boolean
+
+ nuvoton,clock-det-data:
+ description:
+ Request clock detection to require 2048 non-zero samples before enabling
+ the audio paths. If set then non-zero samples is required, otherwise it
+ doesn't matter.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@21 {
+ compatible = "nuvoton,nau8325";
+ reg = <0x21>;
+ nuvoton,vref-impedance = "125kOhm";
+ nuvoton,dac-vref = "1.6V";
+ nuvoton,alc-enable;
+ nuvoton,clock-det-data;
+ };
+ };
--
2.25.1
________________________________
________________________________
The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
