Hi, > As far as arecord is concerned,check if your codec chip has an ADC, what mixer controls are available for recording? Are u setting them ? My codec chip is AD1981B..it is having 2 adc s and 2 dac s.. As I understood ur question, I am using alsamixer for controlling.. In this there is no capture option to control.. Since I am using 2.6.20 linux kernel, which is having in built alsa driver..I inserted these modules only.. Should I cross compile alsa-driver from alsa site and test ??Is this problem related to this..?? I am using alsa for my Atmel's at91sam9263 board..having AC97 based sound card.. What I may do to resolve this ..?? Thank you.. > ----- Original Message ---- > > From: vasudha rao <vasudha.jrao@xxxxxxxxx> > > To: aggarwal <anuj.aggarwal@xxxxxxxxx> > > Cc: alsa-devel@xxxxxxxxxxxxxxxx > > Sent: Tuesday, September 16, 2008 17:08:30 > > Subject: Re: Unable to play aplay > > > > I inserted modules to my linux kernel (2.6.20)like.. > > > > $insmod snd.ko > > $insmod snd-timer.ko > > $insmod snd-page-alloc.ko > > $insmod snd-pcm.ko > > $insmod ac97_bus.ko > > $insmod snd-ac97-codec.ko > > $insmod snd-at91-ac97.ko > > > > After this, I am getting, > > > > $aplay > > > > No error messages.. > > > > $aplay laughter.wav > > Playing WAVE 'laughter.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono > > Bad pte = 5fc3e05f, process = aplay, vm_flags = 800fb, vaddr = 4032c000 > > Bad pte = 5fc3f05f, process = aplay, vm_flags = 800fb, vaddr = 4032d000 > > Unable to handle kernel paging request at virtual address ff800001 > > pgd = c346c000 > > [ff800001] *pgd=00000000 > > Internal error: Oops: 1 [#1] > > Modules linked in: snd_at91_ac97 snd_ac97_codec ac97_bus snd_pcm > > snd_page_alloc snd_timer snd > > CPU: 0 > > PC is at snd_pcm_mmap_data_nopage+0xc4/0xe8 [snd_pcm] > > LR is at 0x4032e000 > > pc : [] lr : [<4032e000>] Not tainted > > sp : c3bb3e6c ip : ff7ffffd fp : c3bb3e80 > > r10: 4032e000 r9 : c001f380 r8 : c3bb2000 > > r7 : c3449764 r6 : 00000000 r5 : c3bb3ea0 r4 : c34a8c00 > > r3 : 00000093 r2 : 00000013 r1 : 00006000 r0 : c0aa3800 > > Flags: nzcv IRQs off FIQs on Mode SVC_32 Segment user > > Control: 5317F > > Table: 2346C000 DAC: 00000015 > > Process aplay (pid: 916, stack limit = 0xc3bb2250) > > Stack: (0xc3bb3e6c to 0xc3bb4000) > > 3e60: 00000000 c3e192ec c3bb3ecc c3bb3e84 > > c0067c58 > > 3e80: bf019030 c346d008 c001f3c0 5fc3f05f 00000000 00000000 c346d008 > > 00000000 > > 3ea0: 00000002 ffffffeb c3d2b040 c3449764 c001f380 c001f3b4 c3bb3fb0 > > 4032e000 > > 3ec0: c3bb3f04 c3bb3ed0 c00293a4 c0067b2c 00022b70 00000000 00000017 > > ffffffff > > 3ee0: c027900c 00000017 c3bb3fb0 4032e000 40388000 400cb5fc c3bb3fac > > c3bb3f08 > > 3f00: c00295c0 c00292dc c3bb3f2c c0377f20 ffffffe7 c0844123 00000000 > > c0023ec4 > > 3f20: 400cb5fc c3bb3f40 c3bb3f34 bf018af4 bf018194 c3bb3f5c c3bb3f44 > > c00823d0 > > 3f40: bf018ad0 c0377f20 00022b70 00000004 c3bb3f84 c3bb3f60 c00826ac > > c00823a4 > > 3f60: 000014c2 ffffffff c3bb3fac c3bb3f78 c01f7ee0 c00275a8 c3d2b080 > > c3d2b154 > > 3f80: 0082ca24 ffffffff 40388734 ffffffff 40389734 00000008 00000004 > > 00000004 > > 3fa0: 00000000 c3bb3fb0 c0023cc8 c0029594 00000000 4032e000 40354000 > > 00000100 > > 3fc0: 00006800 40389734 00000008 00000004 00000004 40388000 400cb5fc > > 00006dcd > > 3fe0: 00000100 bea539d0 00000100 4008ce20 20000010 ffffffff 00000000 > > 00000029 > > Backtrace: > > [] (snd_pcm_mmap_data_nopage+0x0/0xe8 [snd_pcm]) from [] > > (__handle_mm_fault+0x13c/0x760) > > r5 = C3E192EC r4 = 00000000 > > [] (__handle_mm_fault+0x0/0x760) from [] > > (do_page_fault+0xd8/0x20c) > > [] (do_page_fault+0x0/0x20c) from [] > > (do_DataAbort+0x3c/0xa0) > > [] (do_DataAbort+0x0/0xa0) from [] > > (ret_from_exception+0x0/0x10) > > r8 = 00000004 r7 = 00000004 r6 = 00000008 r5 = 40389734 > > r4 = FFFFFFFF > > Code: 1590c00c e10f2000 e3823080 e121f003 (e59c3004) > > Segmentation fault > > > > > > $aplay -l > > card 0: AC97 [Atmel AC97], device 0: Atmel AC97 [Atmel AC97] > > Subdevices: 1/1 > > Subdevice #0: subdevice #0 > > > > $arecord > > ALSA lib pcm_dmix.c:812:(snd_pcm_dmix_open) The dmix plugin supports only > > playback stream > > arecord: main:446: audio open error: Invalid argument > > > > $arecord -l > > > As far as arecord is concerned,check if your codec chip has an ADC, what > mixer controls are available for recording? Are u setting them ? > > > No message here.. > > > > $cat /proc/asound/pcm > > 00-00: Atmel AC97 : Atmel AC97 : playback 1 > > > > Why I am not able to here or record sound..?? > > Where I am doing wrong...?? > > > > Thank you.. > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Sep 11, 2008 at 10:46 AM, vasudha rao wrote: > > > > > Hi anuj , > > > > > > Sorry my mistake..that time I hav not loaded conf files in /usr/share/ > .. I > > > loaded now.. > > > So now when I give command like, > > > > > > ------------------------------------------------- > > > $aplay -l > > > **** List of PLAYBACK Hardware Devices **** > > > card 0: AC97 [Atmel AC97], device 0: Atmel AC97 [Atmel AC97] > > > Subdevices: 1/1 > > > Subdevice #0: subdevice #0 > > > --------------------------------------------------- > > > > > > but,aplay not proper,, > > > ---------------------------- > > > $aplay > > > aplay: main:508: audio open error: Inappropriate ioctl for device > > > ---------------------------- > > > > > > Where I am doing wrong..?? > > > > > > Thank you.. > > > > > > On Thu, Sep 11, 2008 at 10:07 AM, vasudha rao wrote: > > > > > >> > > >> > > >> > > >> Hi Anuj, > > >> > > >> Nodes were not there before..I created now.. > > >> > > >> Now when I did $aplay -l , > > >> I got, > > >> > > >> **** List of PLAYBACK Hardware Devices *** > > >> *ALSA lib control.c:739:(snd_ctl_open_noupdate) Invalid CTL hw:0 > > >> aplay: device_list:208: control open (0): No such file or directory > > >> aplay: conf.c:3083: snd_config_update_free: Assertion `update->count > > 0 > > >> && update->finfo' failed.Aborted > > >> > > >> Where I am doing wrong..?? > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> Thank you.. > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> On Wed, Sep 10, 2008 at 11:54 PM, anuj aggarwal > > wrote: > > >> > > >>> Vasudha, > > >>> > > >>> Could you please check the device nodes in /dev/snd folder? The > > >>> desired output is: > > >>> > > >>> [root@ /home]# ls -l /dev/snd/ > > >>> crw-rw---- 1 root root 116, 5 Jan 1 00:00 controlC0 > > >>> crw-rw---- 1 root root 116, 4 Jan 1 00:00 pcmC0D0c > > >>> crw-rw---- 1 root root 116, 3 Jan 1 00:00 pcmC0D0p > > >>> > > >>> If the nodes are not there, you have to create them first before > trying > > >>> aplay. > > >>> > > >>> Regards, > > >>> Anuj > > >>> > > >>> > > >>> On Wed, Sep 10, 2008 at 6:16 PM, vasudha rao > > >>> wrote: > > >>> > > > >>> > Hi , > > >>> > > > >>> > I want to play and record audio file in my custom atmel 9263 board > > >>> running > > >>> > with linux(2.6.20). > > >>> > when I tried to play aplay for a wave file, I got > > >>> > > > >>> > $aplay /home/alarm.wav > > >>> > ALSA lib pcm.c:1707:(snd_pcm_open_noupdate) Unknown PCM default > > >>> > aplay: main:446: audio open error: No such file or directory > > >>> > > > >>> > $aplay -l > > >>> > aplay: device_list:187: no soundcards found... > > >>> > > > >>> > $cat /proc/asound/devices > > >>> > 2: : timer > > >>> > 3: : sequencer > > >>> > 4: [ 0- 0]: digital audio playback > > >>> > 5: [ 0] : control > > >>> > > > >>> > Can you tel me where I am doing wrong..?? > > >>> > > > >>> > Thanks in advance.. > > >>> > _______________________________________________ > > >>> > Alsa-devel mailing list > > >>> > Alsa-devel@xxxxxxxxxxxxxxxx > > >>> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > >>> > > >>> > > >>> > > >>> -- > > >>> Best Regards, > > >>> Anuj Aggarwal > > >>> > > >> > > >> > > > > > _______________________________________________ > > Alsa-devel mailing list > > Alsa-devel@xxxxxxxxxxxxxxxx > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > > > Get your preferred Email name! > Now you can @ymail.com and @rocketmail.com. > http://mail.promotions.yahoo.com/newdomains/aa/ > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
