The tas2783 is a smart audio amplifier with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed for portable applications. An on-chip DSP supports Texas Instruments SmartAmp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of lodspeakers. The ASoC component provides the majority of the functionality of the device, all the audio functions. Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx> --- Change in v9: - simplify tasdevice_set_sdw_stream - fixed some Linux coding style - fixed the spelling mistakes - Select left/right channel based on unique id - a longer description has been added - remove unused crc8 in KCONFIG - Invert of RE here means reciprocal of RE - correct indentation - correct the wrong pow calibrated register - correct comment on RESET register - fixed usually lines don't end with an open parenthesis - fixed tasdevice_sdw_shutdown - use defines for function, entity, etc. for readable - remove unnecessary codec_lock in component_probe() - remove struct sdw_stream_data - remove unused macro definitions - use BIT(2) and BIT(1) instead of 0x2 and 0x1 - implement pm_runtime - reg_start is u8, reg_start + i only adds i byte, it should be reg_start + i * 4, because the calibration values - fixed total_sz in tas2783_calibration - add a define for TASDEVICE_REG(0, 0, 0x0a) - rework macro style in header file - Add select CRC32 - rewrite the mute and the return value handling - Add comments on bin file - Add link_id into the fw name to distinguish the same sdw id on different sdw id. - remove unnecessary mutex_lock - use set_active() in tasdevice_io_init and move all other parts in the probe. - move pm_runtime_get_noresume to the probe - fix the return value of putvol function - add put_noidle in tasdevice_sdw_remove - remove unused header file(of.h) - correct the style of the multi-line comment - Set the readable registers in tas2783_readable_register for debugfs - Use new PM macros - Use default put and get inline SOC_SINGLE_RANGE_TLV and SOC_SINGLE_SX_TLV - Use respective %pt to log the calibrated time - Remove unnecessary struct tm - Add trailing comma tasdevice_dapm_widgets and tasdevice_audio_map - Rewrite the return value handling in tasdevice_sdw_probe - use dev_num instead of id.unique_id - rework the log - Add code to check the size of calibrated data in UEFI - Add description of Layout of calibrated Data in UEFI - switch back link_id and unique_id to identify the devcie - unique_id offset as the device index of the calibrated data --- sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 851 +++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 106 ++++ 4 files changed, 975 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 59f9742e9ff4..6ba3fd0c0811 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -247,6 +247,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1847,6 +1848,21 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + depends on EFI + select REGMAP + select REGMAP_SOUNDWIRE + select CRC32 + select CRC32_SARWATE + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + TAS2783 supports the MIPI SoundWire v1.2 compatible interface + for audio and control data. At the end of calibrated data appends + the crc data with crc32_sarwate for error detection. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f53baa2b9565..6afceb126ae3 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -284,6 +284,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -664,6 +665,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..42a6f70dd108 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,851 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2023 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// Author: Baojun Xu <baojun.xu@xxxxxx> +// Kevin Lu <kevin-lu@xxxxxx> +// Shenghao Ding <shenghao-ding@xxxxxx> +// + +#include <asm/unaligned.h> +#include <linux/acpi.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm_params.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include <sound/tas2781-tlv.h> +#include "tas2783.h" + +static const unsigned int tas2783_cali_reg[] = { + TAS2783_CALIBRATION_RE, /* Resistance */ + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */ + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */ + TAS2783_CALIBRATION_POW, /* RMS Power */ + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */ +}; + +static const struct reg_default tas2783_reg_defaults[] = { + /* Default values for ROM mode. Activated. */ + { 0x8002, 0x1a }, /* AMP inactive. */ + { 0x8097, 0xc8 }, + { 0x80b5, 0x74 }, + { 0x8099, 0x20 }, + { 0xfe8d, 0x0d }, + { 0xfebe, 0x4a }, + { 0x8230, 0x00 }, + { 0x8231, 0x00 }, + { 0x8232, 0x00 }, + { 0x8233, 0x01 }, + { 0x8418, 0x00 }, /* Set volume to 0 dB. */ + { 0x8419, 0x00 }, + { 0x841a, 0x00 }, + { 0x841b, 0x00 }, + { 0x8428, 0x40 }, /* Unmute channel */ + { 0x8429, 0x00 }, + { 0x842a, 0x00 }, + { 0x842b, 0x00 }, + { 0x8548, 0x00 }, /* Set volume to 0 dB. */ + { 0x8549, 0x00 }, + { 0x854a, 0x00 }, + { 0x854b, 0x00 }, + { 0x8558, 0x40 }, /* Unmute channel */ + { 0x8559, 0x00 }, + { 0x855a, 0x00 }, + { 0x855b, 0x00 }, + { 0x800a, 0x3a }, /* Enable both channel */ + { 0x800e, 0x44 }, + { 0x800f, 0x40 }, + { 0x805c, 0x99 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_VOLUME, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0x807F: /* Page 0 */ + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + /* + * Only software reset register was volatiled. + * Bit is self clearing. + * 0b = Don't reset + * 1b = reset + */ + case 0x8001: + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x44ffffff, + .reg_defaults = tas2783_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, dvc_tlv), + SOC_SINGLE_SX_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, amp_vol_tlv), +}; + +static void tas2783_apply_calib(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + struct regmap *map = tas_dev->regmap; + u8 *cali_start; + u16 offset; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + offset = tas_dev->sdw_peripheral->id.unique_id - + TAS2783_UNIQUE_ID_BASE; + if (offset >= TAS2783_MAX_DEV_NUM) { + dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n", + __func__, offset); + return; + } + + /* + * The area saving tas2783 calibrated data is specified by its + * unique_id offset. cali_start is the first address of current + * tas2783's calibrated data. + */ + cali_start = (u8 *)(cali_data + offset * sizeof(tas2783_cali_reg)); + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + ret = regmap_bulk_write(map, tas2783_cali_reg[i], + &cali_start[4 * i], 4); + if (ret) { + dev_err(tas_dev->dev, "Cali failed %x:%d\n", + tas2783_cali_reg[i], ret); + break; + } + } +} + +/* + * Load the calibration data, including speaker impedance, f0, etc. + * Calibration is done by the manufacturer in the factory. The calibration + * data are used by the algorithm for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * The DSP will work with default data values if calibrated data are + * missing or are invalid. + * Layout of calibrated Data in UEFI: + * Calibrated Data of Dev 0(unique_id offset 0) (20 bytes) + * Calibrated Data of Dev 1(unique_id offset 1) (20 bytes) + * Calibrated Data of Dev 2(unique_id offset 2) (20 bytes) + * Calibrated Data of Dev 3(unique_id offset 3) (20 bytes) + * Calibrated Data of Dev 4(unique_id offset 4) (20 bytes) + * Calibrated Data of Dev 5(unique_id offset 5) (20 bytes) + * Calibrated Data of Dev 6(unique_id offset 6) (20 bytes) + * Calibrated Data of Dev 7(unique_id offset 7) (20 bytes) + * TimeStamp of Calibration (4 bytes) + * CRC (4 bytes) + * Reserved (88 bytes) + */ +static void tas2783_calibration(struct tasdevice_priv *tas_dev) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct calibration_data cali_data; + unsigned int *tmp_val; + unsigned int crc; + efi_status_t status; + + cali_data.total_sz = 0; + + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, NULL); + if (status == EFI_BUFFER_TOO_SMALL + && cali_data.total_sz < TAS2783_MAX_CALIDATA_SIZE) { + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, + cali_data.data); + dev_dbg(tas_dev->dev, "%s: cali get %lx bytes result:%ld\n", + __func__, cali_data.total_sz, status); + } + if (status != 0) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return; + } + + tmp_val = (unsigned int *)cali_data.data; + + /* 8 devs * 20 bytes calibrated data/dev + 4 bytes Timestamp */ + crc = crc32(~0, cali_data.data, 164) ^ ~0; + + if (crc == tmp_val[41]) { + /* Date and time of when calibration was done. */ + tas2783_apply_calib(tas_dev, tmp_val); + dev_dbg(tas_dev->dev, "%ptTs", &tmp_val[40]); + } else { + dev_dbg(tas_dev->dev, "CRC 0x%08x not match 0x%08x\n", + crc, tmp_val[41]); + } +} + +static void tasdevice_dspfw_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tas2783_firmware_node *p; + struct regmap *map = tas_dev->regmap; + unsigned char *buf = NULL; + int offset = 0, img_sz; + int ret; + + if (!fmw || !fmw->data) { + dev_warn(tas_dev->dev, + "%s: failed to read %s: work in bypass-dsp mode.\n", + __func__, tas_dev->dspfw_binaryname); + return; + } + buf = (unsigned char *)fmw->data; + + img_sz = get_unaligned_le32(&buf[offset]); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_warn(tas_dev->dev, "%s: size not matching, %d %u.", + __func__, (int)fmw->size, img_sz); + return; + } + + while (offset < img_sz) { + p = (struct tas2783_firmware_node *)(buf + offset); + if (p->length > 1) { + ret = regmap_bulk_write(map, p->download_addr, + buf + offset + sizeof(unsigned int) * 5, p->length); + } else { + ret = regmap_write(map, p->download_addr, + *(buf + offset + sizeof(unsigned int) * 5)); + } + + if (ret != 0) { + dev_dbg(tas_dev->dev, + "%s: load FW fail: %d, work in bypass.\n", + __func__, ret); + return; + } + offset += sizeof(unsigned int) * 5 + p->length; + } + + tas2783_calibration(tas_dev); +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC"), +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"OUT", NULL, "ASI"}, + {"ASI OUT", NULL, "DMIC"}, +}; + +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + int ret; + + dev_dbg(dai->dev, "%s: dai_name %s", __func__, dai->name); + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!sdw_stream) + return -EINVAL; + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) { + dev_err(dai->dev, "%s: Unable to configure port\n", __func__); + return ret; + } + + dev_dbg(dai->dev, "%s: format: %i rate: %i\n", __func__, + params_format(params), params_rate(params)); + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream); + + return 0; +} + +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, + int direction) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct regmap *map = tas_dev->regmap; + int ret; + + dev_dbg(tas_dev->dev, "%s: %d.\n", __func__, mute); + + if (mute) { + if (direction == SNDRV_PCM_STREAM_CAPTURE) { + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_INACTIVE); + if (ret) + dev_err(tas_dev->dev, + "%s: Disable AEF failed.\n", __func__); + } else { + /* FU23 mute (0x40400108) */ + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 1); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 mute failed.\n", __func__); + goto out; + } + /* + * Both playback and echo data will be shutdown in + * playback stream. + */ + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK | + TAS2783_REG_AEF_MASK, + TAS2783_REG_PWR_MODE_ACTIVE | + TAS2783_REG_PWR_MODE_SW_PWD); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR&AEF shutdown failed.\n", + __func__); + goto out; + } + tas_dev->pstream = false; + } + } else { + /* FU23 Unmute, 0x40400108. */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 Unmute failed.\n", __func__); + goto out; + } + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK, + TAS2783_REG_PWR_MODE_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR Unmute failed.\n", __func__); + goto out; + } + tas_dev->pstream = true; + } else { + /* Capture stream is the echo ref data for voice. + * Without playback, it can't be active. + */ + if (tas_dev->pstream == true) { + ret = regmap_update_bits(map, + TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: AEF enable failed.\n", + __func__); + goto out; + } + } else { + dev_err(tas_dev->dev, + "%s: No playback, no AEF!", __func__); + ret = -EINVAL; + } + } + } +out: + if (ret) + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n", + mute, ret); + + return ret; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .mute_stream = tasdevice_mute, + .hw_params = tasdevice_sdw_hw_params, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static int tasdevice_comp_probe(struct snd_soc_component *comp) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(comp); + acpi_handle handle = ACPI_HANDLE(tas_dev->dev); + const struct firmware *fw_entry = NULL; + const char *sub = NULL; + int ret; + + if (handle) { + sub = acpi_get_subsystem_id(handle); + if (IS_ERR(sub)) + sub = NULL; + } + + tas_dev->component = comp; + + /* + * Each tas2783 in the system has its own dspfw. + */ + if (comp->name_prefix) { + /* + * name_prefix.bin stores the dsp firmware including speaker + * protection algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied into + * firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, "%s-tas2783.bin", + comp->name_prefix); + } else { + /* Compatible with the previous naming rule */ + if (sub) { + /* + * subsys_id-link_id[0,1,...,N]-unique_id[1,...,4].bin + * stores the dsp firmware including speaker protection + * algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied + * into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "%s-%d-%d.bin", sub, + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } else { + /* + * tas2783-link_id[0,1,...,N]-unique_id[1,...,4].bin + * stores the dsp firmware including speaker protection + * algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied + * into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "tas2783-%d-%d.bin", + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } + } + + ret = request_firmware(&fw_entry, tas_dev->dspfw_binaryname, + tas_dev->dev); + if (ret) { + dev_err(tas_dev->dev, + "%s: request_firmware %x open status: %d.\n", __func__, + tas_dev->sdw_peripheral->id.unique_id, ret); + goto out; + } + + tasdevice_dspfw_ready(fw_entry, tas_dev); + +out: + if (fw_entry) + release_firmware(fw_entry); + return 0; +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_comp_probe, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + return ret; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + + return 0; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct sdw_dpn_prop *dpn; + unsigned long addr; + int nval, i, j; + u32 bit; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = BIT(2); /* BITMAP: 00000100 */ + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = true; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + return 0; +} + +static int tasdevice_io_init(struct device *dev, + struct sdw_slave *slave) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(tas_priv->regmap, false); + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, true); + } else { + /* + * PM runtime is only enabled when a Slave reports as Attached + * Update count of parent 'active' children. + */ + pm_runtime_set_active(&slave->dev); + } + + /* sw reset */ + ret = regmap_write(tas_priv->regmap, TAS2873_REG_SWRESET, + TAS2873_REG_SWRESET_RESET); + if (ret) { + dev_err(tas_priv->dev, "Reset failed.\n"); + goto out; + } + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, false); + regcache_mark_dirty(tas_priv->regmap); + } + + tas_priv->first_hw_init = true; + tas_priv->hw_init = true; + +out: + return ret; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev); + + /* Update the status */ + tas_priv->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + tas_priv->hw_init = false; + /* + * Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return -ENOMEM; + + tas_dev->dev = dev; + tas_dev->chip_id = id->driver_data; + tas_dev->sdw_peripheral = peripheral; + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + tas_dev->hw_init = false; + tas_dev->first_hw_init = false; + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init_sdw(peripheral, &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) + return dev_err_probe(dev, PTR_ERR(tas_dev->regmap), + "Failed devm_regmap_init_sdw."); + + return tasdevice_init(tas_dev); +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev); + + if (tas_dev->first_hw_init) + pm_runtime_disable(tas_dev->dev); + + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {} +}; +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + + if (!tas_priv->hw_init) + return 0; + + regcache_cache_only(tas_priv->regmap, true); + + return 0; +} + +#define TAS2783_PROBE_TIMEOUT_MS 5000 + +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long time; + + if (!tas_priv->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT_MS)); + if (!time) { + dev_err(&slave->dev, "Init not complete, timed out\n"); + sdw_show_ping_status(slave->bus, true); + + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(tas_priv->regmap, false); + regcache_sync(tas_priv->regmap); + + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume) + RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume, NULL) +}; + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = &tas2783_sdca_pm, + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu <baojun.xu@xxxxxx>"); +MODULE_AUTHOR("Shenghao Ding <shenghao-ding@xxxxxx>"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..631776dcec4c --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated + * https://www.ti.com + * + * Author: Baojun Xu <baojun.xu@xxxxxx> + * Shenghao Ding <shenghao-ding@xxxxxx> + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +/* Unique id start */ +#define TAS2783_UNIQUE_ID_BASE 0x08 +#define TAS2783_MAX_DEV_NUM 8 + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) + +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0x00, 0x01) +#define TAS2873_REG_SWRESET_MASK BIT(0) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +#define TAS2873_REG_PWR_CTRL TASDEVICE_REG(0x0, 0x00, 0x02) +#define TAS2783_REG_AEF_MASK GENMASK(4, 3) +#define TAS2783_REG_AEF_ACTIVE 0 +#define TAS2783_REG_AEF_INACTIVE GENMASK(4, 3) +#define TAS2783_REG_PWR_MODE_MASK GENMASK(2, 0) +#define TAS2783_REG_PWR_MODE_ACTIVE 0 +#define TAS2783_REG_PWR_MODE_SW_PWD BIT(1) + +#define TAS2783_REG_TDM_RX_CFG TASDEVICE_REG(0x0, 0x00, 0x0a) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1a) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +/* TAS2783 SDCA Control - function number */ +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 +#define TAS2783_DSPFW_FILENAME_LEN 64 + +#define TAS2783_MAX_CALIDATA_SIZE 256 + +struct tas2783_firmware_node { + unsigned int vendor_id; + unsigned int file_id; + unsigned int version_id; + unsigned int length; + unsigned int download_addr; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; +}; + +struct tasdevice_priv { + struct snd_soc_component *component; + struct sdw_slave *sdw_peripheral; + enum sdw_slave_status status; + struct sdw_bus_params params; + struct regmap *regmap; + struct device *dev; + unsigned char dspfw_binaryname[TAS2783_DSPFW_FILENAME_LEN]; + unsigned char dev_name[32]; + unsigned int chip_id; + bool pstream; + bool hw_init; + bool first_hw_init; +}; + +#endif /*__TAS2783_H__ */ -- 2.34.1
