Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part
of the SoMC SM8550 Yodo platform.
This commit brings support for:
* Remoteprocs (sans modem for now)
* Flash LED (the notification LED is gone :((((()
* SD Card
* USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a replug
with an cable flip sometimes..)
* Most regulators
* Part of I2C-connected peripherals (notably no touch due to a
driver bug)
* PCIe0 (PCIe1 is unused)
Do note display via simplefb is not supported, as the display is blanked
upon exiting XBL.
To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\
yodo-pdx234.dtb > .Image.gz-dtb
mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 2 \
-o boot.img-sony-xperia-pdx234
Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:
// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system \
vbmeta_system.img
fastboot flash boot boot.img-sony-xperia-pdx234
fastboot erase vendor_boot
fastboot erase recovery
fastboot flash dtbo emptydtbo.img
fastboot erase init_boot // ? I don't remember if it's necessary, sorry
fastboot continue
Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 779 +++++++++++++++++++++
2 files changed, 780 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f7c5662213e4..9bbea531660d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
new file mode 100644
index 000000000000..85e0d3d66e16
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/cs35l45.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+/* TODO: Only one SID of PMR735D seems accessible? */
+
+/delete-node/ &hwfence_shbuf;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+/ {
+ model = "Sony Xperia 1 V";
+ compatible = "sony,pdx234", "qcom,sm8550";
+ chassis-type = "handset";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c16 = &i2c_hub_2;
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ label = "gpio-keys";
+
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+ pinctrl-names = "default";
+
+ key-camera-focus {
+ label = "Camera Focus";
+ linux,code = <KEY_CAMERA_FOCUS>;
+ gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ key-camera-snapshot {
+ label = "Camera Snapshot";
+ gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+ orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ mpss_mem: mpss-region@89800000 {
+ reg = <0x0 0x89800000 0x0 0x10800000>;
+ no-map;
+ };
+
+ splash@b8000000 {
+ reg = <0x0 0xb8000000 0x0 0x2b00000>;
+ no-map;
+ };
+
+ hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+ reg = <0x0 0xe6440000 0x0 0x2dd000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@f8b00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xf8b00000 0x0 0x280000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+ };
+
+ ramoops@ffd00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffd00000 0x0 0xc0000>;
+ console-size = <0x40000>;
+ record-size = <0x1000>;
+ pmsg-size = <0x40000>;
+ ecc-size = <16>;
+ };
+
+ rdtag-store-region@ffdc0000 {
+ reg = <0x0 0xffdc0000 0x0 0x40000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ pm8550_bob1: bob1 {
+ regulator-name = "pm8550_bob1";
+ regulator-min-microvolt = <3416000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */
+
+ pm8550_l1: ldo1 {
+ regulator-name = "pm8550_l1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l2: ldo2 {
+ regulator-name = "pm8550_l2";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L4 exists in cmd-db, but the board seems to crash on access */
+
+ pm8550_l5: ldo5 {
+ regulator-name = "pm8550_l5";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l6: ldo6 {
+ regulator-name = "pm8550_l6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l7: ldo7 {
+ regulator-name = "pm8550_l7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l8: ldo8 {
+ regulator-name = "pm8550_l8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l9: ldo9 {
+ regulator-name = "pm8550_l9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l10: ldo10 {
+ regulator-name = "pm8550_l10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l11: ldo11 {
+ regulator-name = "pm8550_l11";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l12: ldo12 {
+ regulator-name = "pm8550_l12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l13: ldo13 {
+ regulator-name = "pm8550_l13";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l14: ldo14 {
+ regulator-name = "pm8550_l14";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l15: ldo15 {
+ regulator-name = "pm8550_l15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l16: ldo16 {
+ regulator-name = "pm8550_l16";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l17: ldo17 {
+ regulator-name = "pm8550_l17";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ pm8550vs_0_l1: ldo1 {
+ regulator-name = "pm8550vs_0_l1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_0_l3: ldo3 {
+ regulator-name = "pm8550vs_0_l3";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ pm8550vs_1_l1: ldo1 {
+ regulator-name = "pm8550vs_1_l1";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L3 exists in cmd-db, but the board seems to crash on access */
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ pm8550vs_2_s4: smps4 {
+ regulator-name = "pm8550vs_2_s4";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_s5: smps5 {
+ regulator-name = "pm8550vs_2_s5";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_l1: ldo1 {
+ regulator-name = "pm8550vs_2_l1";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_l2: ldo2 {
+ regulator-name = "pm8550vs_2_l2";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <968000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_l3: ldo3 {
+ regulator-name = "pm8550vs_2_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ pm8550ve_s4: smps4 {
+ regulator-name = "pm8550ve_s4";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550ve_l1: ldo1 {
+ regulator-name = "pm8550ve_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550ve_l2: ldo2 {
+ regulator-name = "pm8550ve_l2";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550ve_l3: ldo3 {
+ regulator-name = "pm8550ve_l3";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "g";
+
+ pm8550vs_3_s1: smps1 {
+ regulator-name = "pm8550vs_3_s1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s2: smps2 {
+ regulator-name = "pm8550vs_3_s2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1036000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s3: smps3 {
+ regulator-name = "pm8550vs_3_s3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s4: smps4 {
+ regulator-name = "pm8550vs_3_s4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s5: smps5 {
+ regulator-name = "pm8550vs_3_s5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s6: smps6 {
+ regulator-name = "pm8550vs_3_s6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_l1: ldo1 {
+ regulator-name = "pm8550vs_3_l1";
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_l2: ldo2 {
+ regulator-name = "pm8550vs_3_l2";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_l3: ldo3 {
+ regulator-name = "pm8550vs_3_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&i2c_hub_2 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+ dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&cam_pwr_a_cs>;
+ pinctrl-names = "default";
+
+ regulators {
+ slg51000_a_ldo1: ldo1 {
+ regulator-name = "slg51000_a_ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo2: ldo2 {
+ regulator-name = "slg51000_a_ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo3: ldo3 {
+ regulator-name = "slg51000_a_ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo4: ldo4 {
+ regulator-name = "slg51000_a_ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo5: ldo5 {
+ regulator-name = "slg51000_a_ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo6: ldo6 {
+ regulator-name = "slg51000_a_ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo7: ldo7 {
+ regulator-name = "slg51000_a_ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
+};
+
+&i2c_master_hub_0 {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <1000000>;
+ status = "okay";
+
+ /* NXP NFC @ 28 */
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* LX Semi SW82907 touchscreen @ 28 */
+};
+
+&i2c10 {
+ clock-frequency = <1000000>;
+ status = "okay";
+
+ /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&i2c11 {
+ clock-frequency = <1000000>;
+ status = "okay";
+
+ cs35l41_l: speaker-amp@30 {
+ compatible = "cirrus,cs35l45";
+ reg = <0x30>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+ cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+ #sound-dai-cells = <1>;
+
+ cirrus,gpio-ctrl2 {
+ gpio-ctrl = <0x2>;
+ };
+ };
+
+ cs35l41_r: speaker-amp@31 {
+ compatible = "cirrus,cs35l45";
+ reg = <0x31>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+ cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+ #sound-dai-cells = <1>;
+
+ cirrus,gpio-ctrl2 {
+ gpio-ctrl = <0x2>;
+ };
+ };
+};
+
+&pcie0 {
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&pm8550vs_2_l1>;
+ vdda-pll-supply = <&pm8550vs_2_l3>;
+
+ status = "okay";
+};
+
+&pm8550_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>, <4>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1000000>;
+ flash-max-timeout-us = <1280000>;
+ function-enumerator = <0>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <2>, <3>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1000000>;
+ flash-max-timeout-us = <1280000>;
+ function-enumerator = <1>;
+ };
+};
+
+&pm8550_gpios {
+ vol_down_n: volume-down-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ sdc2_card_det_n: sd-card-det-n-state {
+ pins = "gpio12";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-down;
+ output-disable;
+ input-enable;
+ };
+};
+
+&pm8550b_gpios {
+ snapshot_n: snapshot-n-state {
+ pins = "gpio7";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ focus_n: focus-n-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8550vs_g_gpios {
+ cam_pwr_a_cs: cam-pwr-a-cs-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <0x01>;
+ drive-push-pull;
+ output-low;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
+ qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
+ qcom,tune-usb2-preem = /bits/ 8 <0x7>;
+ vdd18-supply = <&pm8550_l15>;
+ vdd3-supply = <&pm8550_l5>;
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEUP>;
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
+ "qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
+ "qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+ vmmc-supply = <&pm8550_l9>;
+ vqmmc-supply = <&pm8550_l8>;
+ no-sdio;
+ no-mmc;
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 8>;
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&pm8550vs_2_l1>;
+ vdda12-supply = <&pm8550vs_2_l3>;
+ phys = <&pm8550b_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&pm8550vs_2_l3>;
+ vdda-pll-supply = <&pm8550ve_l3>;
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--
2.43.1
