The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect,
but the used jack connector outputs an inverted jack-detect signal.
Add a DMI quirk for this.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
sound/soc/codecs/rt5645.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index b3865e3c3259..9672d1bac4e1 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3692,6 +3692,11 @@ static const struct rt5645_platform_data jd_mode3_monospk_platform_data = {
.mono_speaker = true,
};
+static const struct rt5645_platform_data jd_mode3_inv_data = {
+ .jd_mode = 3,
+ .inv_jd1_1 = true,
+};
+
static const struct rt5645_platform_data jd_mode3_platform_data = {
.jd_mode = 3,
};
@@ -3881,6 +3886,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
},
.driver_data = (void *)&intel_braswell_platform_data,
},
+ {
+ .ident = "Meegopad T08",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+ DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
+ },
+ .driver_data = (void *)&jd_mode3_inv_data,
+ },
{ }
};
--
2.43.0
