Sir,If you have, can you please send me the o/p of this comand, $ls -lh /dev/snd/ Thank you.. On Thu, Sep 11, 2008 at 2:00 PM, dinesh <dinesh.dua@xxxxxxxxxxxxx> wrote: > Hi,> As per ur proc enteries you havn't registered any capture device so u can> not do recording with ur device.>>>> -----Original Message-----> *From*: vasudha rao <vasudha.jrao@xxxxxxxxx<vasudha%20rao%20%3cvasudha.jrao@xxxxxxxxx%3e>> >> *To*: aggarwal <anuj.aggarwal@xxxxxxxxx<aggarwal%20%3canuj.aggarwal@xxxxxxxxx%3e>> >> *Cc*: alsa-devel@xxxxxxxxxxxxxxxx> *Subject*: aplay not working> *Date*: Thu, 11 Sep 2008 13:33:10 +0530>> Hi ,>> I am not able to do audio record also..>> I tried following commands..>> $arecord> RIFF$��.WAVEfmt ...@.@.data��.Recording WAVE 'stdout' : Unsigned 8 bit, Rate> 8000 Hz, Mono> arecord: xrun:1037: read/write error, state = PREPARED>> $aplay -l> **** List of PLAYBACK Hardware Devices ****> card 0: AC97 [Atmel AC97], device 0: Atmel AC97 [Atmel AC97]> Subdevices: 1/1> Subdevice #0: subdevice #0>> $aplay> aplay: main:508: audio open error: Inappropriate ioctl for device>> $cat /proc/asound/cards> 0 [AC97 ]: ac97c - Atmel AC97> Atmel AC97 Controller at 0xfffa0000, irq 18>>> $cat /proc/asound/version> Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09> 09:56:17 2007 UTC).>> $cat /proc/asound/devices> 2: : timer> 3: : sequencer> 4: [ 0- 0]: digital audio playback> 5: [ 0] : control>>> Where I am doing wrong..>>>> Thank you..> _______________________________________________> Alsa-devel mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>_______________________________________________Alsa-devel mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel
