Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 31, 2024 at 2:32 PM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 31/01/2024 14:17, Linus Walleij wrote:
> > On Wed, Jan 31, 2024 at 10:37 AM Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
> >
> >> [Me]
> >>> reset -> virtual "gpio" -> many physical gpios[0..n]
> >>
> >> This is a different problem: it supports many users enabling the same
> >> GPIO (in Krzysztof's patch it's one but could be more if needed) but -
> >> unlike the broken NONEXCLUSIVE GPIOs in GPIOLIB - it counts the number
> >> of users and doesn't disable the GPIO for as long as there's at least
> >> one.
> >
> > I don't know if the NONEXCLUSIVE stuff is broken, if you mean reference
> > counting isn't working on them, then that is by design because they were
> > invented for regulators and such use cases that do their own reference
> > counting. It's also used for hacks where people need to look up a desc in
> > a second spot, (perhaps we can fix those better).
> >
> > As I say in commit b0ce7b29bfcd090ddba476f45a75ec0a797b048a
> > "This solution with a special flag is not entirely elegant and should ideally
> > be replaced by something more careful as this makes it possible for
> > several consumers to enable/disable the same GPIO line to the left
> > and right without any consistency."
> >
> > I think for regulators (which is the vast majority using it) it isn't broken
> > because the regulator reference counting is working.
> >
> > So if we solve that problem for reset, we probably should put it in
> > drivers/gpio/* somewhere so we can reuse the same solution for
> > regulators and get rid of NONEXCLUSIVE altogether I think?
> >
> > The NONEXCLUSIVE stuff was prompted by converting regulators to
> > gpio descriptors, so it was for the greater good one can say. Or the
> > lesser evil :( my judgement can be questioned here.
>
> I discussed the non-exclusive GPIOs with Bartosz quite a lot, who was
> Cced since beginning of this patchset, because that was my first
> approach, which was rejected:
>
> https://lore.kernel.org/all/b7aeda24-d638-45b7-8e30-80d287f498f8@xxxxxxxxxxxxx/
>
> The non-exclusive GPIO was made explicitly for regulators, so it is
> working fine there, but it is broken everywhere else, where the drivers
> do not handle it in sane way as regulator core does.
>
> To make it working, either GPIO should be enable-count-aware, to which
> Bartosz was opposing with talks with me, or the subsystem should mimic

For the record: I'm not 100% opposed to the enable-count-awarness of
GPIOs but don't want it to be the standard. I'm open for introducing a
wrapper built around the core, low-level GPIO API but I've just
dropped a big patchset addressing the access control and serialization
issues for the GPIO consumer API and I would rather work towards
making it at least more-or-less correct in the first place before we
start overcomplicating it again.

Bartosz

> regulators approach. In some way, my patchset is the second way here -
> reset framework subsystem being aware of shared GPIO and handles the
> enable-count, even though it is not using non-exclusive flag.
>
> Best regards,
> Krzysztof
>




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux