Move the call to cs35l56_set_patch() earlier in cs35l56_init() so that it only adds the register patch on first-time initialization. The call was after the post_soft_reset label, so every time this function was run to re-initialize the hardware after a reset it would call regmap_register_patch() and add the same reg_sequence again. Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx> Fixes: 898673b905b9 ("ASoC: cs35l56: Move shared data into a common data structure") --- sound/soc/codecs/cs35l56.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 491da77112c3..ea5d2b2eb82a 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -1159,6 +1159,10 @@ int cs35l56_init(struct cs35l56_private *cs35l56) if (ret < 0) return ret; + ret = cs35l56_set_patch(&cs35l56->base); + if (ret) + return ret; + /* Populate the DSP information with the revision and security state */ cs35l56->dsp.part = devm_kasprintf(cs35l56->base.dev, GFP_KERNEL, "cs35l56%s-%02x", cs35l56->base.secured ? "s" : "", cs35l56->base.rev); @@ -1197,10 +1201,6 @@ int cs35l56_init(struct cs35l56_private *cs35l56) if (ret) return ret; - ret = cs35l56_set_patch(&cs35l56->base); - if (ret) - return ret; - /* Registers could be dirty after soft reset or SoundWire enumeration */ regcache_sync(cs35l56->base.regmap); -- 2.39.2