The vendor driver appears to be modifying the gain settings behind the
back of user space but these hacks never made it upstream except for
some essentially dead code that adds a constant zero to the current gain
setting on DAPM events.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
sound/soc/codecs/wcd9335.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index 43c648efd0d9..deb15b95992d 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -3033,7 +3033,6 @@ static int wcd9335_codec_enable_mix_path(struct snd_soc_dapm_widget *w,
{
struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm);
u16 gain_reg;
- int offset_val = 0;
int val = 0;
switch (w->reg) {
@@ -3073,7 +3072,6 @@ static int wcd9335_codec_enable_mix_path(struct snd_soc_dapm_widget *w,
switch (event) {
case SND_SOC_DAPM_POST_PMU:
val = snd_soc_component_read(comp, gain_reg);
- val += offset_val;
snd_soc_component_write(comp, gain_reg, val);
break;
case SND_SOC_DAPM_POST_PMD:
@@ -3294,7 +3292,6 @@ static int wcd9335_codec_enable_interpolator(struct snd_soc_dapm_widget *w,
u16 gain_reg;
u16 reg;
int val;
- int offset_val = 0;
if (!(snd_soc_dapm_widget_name_cmp(w, "RX INT0 INTERP"))) {
reg = WCD9335_CDC_RX0_RX_PATH_CTL;
@@ -3337,7 +3334,6 @@ static int wcd9335_codec_enable_interpolator(struct snd_soc_dapm_widget *w,
case SND_SOC_DAPM_POST_PMU:
wcd9335_config_compander(comp, w->shift, event);
val = snd_soc_component_read(comp, gain_reg);
- val += offset_val;
snd_soc_component_write(comp, gain_reg, val);
break;
case SND_SOC_DAPM_POST_PMD:
--
2.41.0
