On 18/01/2024 16:58, Johan Hovold wrote:
The UCM configuration for the Lenovo ThinkPad X13s has up until now been setting the speaker PA volume to -3 dB when enabling the speakers, but this does not prevent the user from increasing the volume further. Limit the PA volume to -3 dB in the machine driver to reduce the risk of speaker damage until we have active speaker protection in place. Note that this will probably need to be generalised using machine-specific limits, but a common limit should do for now. Cc: stable@xxxxxxxxxxxxxxx # 6.5 Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- sound/soc/qcom/sc8280xp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c index ed4bb551bfbb..a19bfa354af8 100644 --- a/sound/soc/qcom/sc8280xp.c +++ b/sound/soc/qcom/sc8280xp.c @@ -32,12 +32,14 @@ static int sc8280xp_snd_init(struct snd_soc_pcm_runtime *rtd) case WSA_CODEC_DMA_RX_0: case WSA_CODEC_DMA_RX_1: /* - * set limit of 0dB on Digital Volume for Speakers, - * this can prevent damage of speakers to some extent without - * active speaker protection + * Set limit of 0 dB on Digital Volume and -3 dB on PA Volume + * to reduce the risk of speaker damage until we have active + * speaker protection in place.
I would prefer a 0dB here instead of -3dB, this could become issue if we are testing speakers without any pluseaudio or any software amplification. ex: console
*/ snd_soc_limit_volume(card, "WSA_RX0 Digital Volume", 84); snd_soc_limit_volume(card, "WSA_RX1 Digital Volume", 84); + snd_soc_limit_volume(card, "SpkrLeft PA Volume", 1); + snd_soc_limit_volume(card, "SpkrRight PA Volume", 1)
It would be nice to consider using component->name_prefix here. thanks, srini ;
break; default: break;
