Fri, Aug 04, 2023 at 11:45:57AM +0100, Charles Keepax kirjoitti: > From: Lucas Tanure <tanureal@xxxxxxxxxxxxxxxxxxxxx> > > Currently the in-band alerts for SoundWire peripherals can only > be communicated to the driver through the interrupt_callback > function. This however is slightly inconvenient for devices that wish > to share IRQ handling code between SoundWire and I2C/SPI, the later > would normally register an IRQ handler with the IRQ subsystem. However > there is no reason the SoundWire in-band IRQs can not also be > communicated as an actual IRQ to the driver. > > Add support for SoundWire peripherals to register a normal IRQ > handler to receive SoundWire in-band alerts, allowing code to be > shared across control buses. Note that we allow users to use both the > interrupt_callback and the IRQ handler, this is useful for devices > which must clear additional chip specific SoundWire registers that are > not a part of the normal IRQ flow, or the SoundWire specification. ... > +#include <linux/irqdomain.h> Added code doesn't use anythitg from above. It can be fulfilled with a forward declaration. -- With Best Regards, Andy Shevchenko
