ALSA code tests each bit in bitmaps in a for() loop. Switch it to using dedicated atomic find_bit() API. Signed-off-by: Yury Norov <yury.norov@xxxxxxxxx> Acked-by: Takashi Iwai <tiwai@xxxxxxx> --- sound/pci/hda/hda_codec.c | 7 +++---- sound/usb/caiaq/audio.c | 13 +++++-------- 2 files changed, 8 insertions(+), 12 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 01718b1fc9a7..29254005f394 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3275,10 +3275,9 @@ static int get_empty_pcm_device(struct hda_bus *bus, unsigned int type) #ifdef CONFIG_SND_DYNAMIC_MINORS /* non-fixed slots starting from 10 */ - for (i = 10; i < 32; i++) { - if (!test_and_set_bit(i, bus->pcm_dev_bits)) - return i; - } + i = find_and_set_next_bit(bus->pcm_dev_bits, 32, 10); + if (i < 32) + return i; #endif dev_warn(bus->card->dev, "Too many %s devices\n", diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 4981753652a7..74dfcf32b439 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -610,7 +610,7 @@ static void read_completed(struct urb *urb) struct snd_usb_caiaq_cb_info *info = urb->context; struct snd_usb_caiaqdev *cdev; struct device *dev; - struct urb *out = NULL; + struct urb *out; int i, frame, len, send_it = 0, outframe = 0; unsigned long flags; size_t offset = 0; @@ -625,17 +625,14 @@ static void read_completed(struct urb *urb) return; /* find an unused output urb that is unused */ - for (i = 0; i < N_URBS; i++) - if (test_and_set_bit(i, &cdev->outurb_active_mask) == 0) { - out = cdev->data_urbs_out[i]; - break; - } - - if (!out) { + i = find_and_set_bit(&cdev->outurb_active_mask, N_URBS); + if (i >= N_URBS) { dev_err(dev, "Unable to find an output urb to use\n"); goto requeue; } + out = cdev->data_urbs_out[i]; + /* read the recently received packet and send back one which has * the same layout */ for (frame = 0; frame < FRAMES_PER_URB; frame++) { -- 2.40.1