[PATCH v3 1/3] arm64: dts: imx93: Add audio device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add audio devices nodes including SAI, MICFIL, XCVR and MQS.

Signed-off-by: Chancel Liu <chancel.liu@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 87 ++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index ceccf4766440..9a7bff39519c 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -171,6 +171,18 @@ cm33: remoteproc-cm33 {
 		status = "disabled";
 	};
 
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -367,6 +379,19 @@ flexcan1: can@443a0000 {
 				status = "disabled";
 			};
 
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			iomuxc: pinctrl@443c0000 {
 				compatible = "fsl,imx93-iomuxc";
 				reg = <0x443c0000 0x10000>;
@@ -447,6 +472,23 @@ tmu: tmu@44482000 {
 				#thermal-sensor-cells = <1>;
 			};
 
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "clkext3";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
 
 			adc1: adc@44530000 {
 				compatible = "nxp,imx93-adc";
@@ -738,6 +780,51 @@ flexspi1: spi@425e0000 {
 				status = "disabled";
 			};
 
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			lpuart7: serial@42690000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
-- 
2.42.0




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux