Hi Daniel
> > But hmm... in your case, you need to setup 2ports, and use 2nd port
> > is assumed approach.
> > Why you don't setup full port ? Do you have some reason ??
(snip)
> Now, I want to write a DTS description where my DAI link uses
> Component 0 (CPU) (with its DAI index 1) connected with Component 1
> (codec) (with its DAI index 0).
Thank you for indicating your DTS.
So in imx8m_dai case, it has total 3 DAIs, and you want to use reg = 1.
In such case, your DTS need to have like below, if my understanding was
correct.
dsp: dsp@3b6e8000 {
ports {
port@0 { reg = <0>; endpoint { /* not used */ }; };
cpu: port@1 { reg = <1>; cpu_ep: endpoint { remote-endpoint = <xxx>; }; };
port@2 { reg = <2>; endpoint { /* not used */ }; };
};
};
Thank you for your help !!
Best regards
---
Kuninori Morimoto
