Re: Ryzen 9 7950x sound module does not not build

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/09/2023 16:40, Randy Dunlap wrote:

On 9/27/23 04:27, Sid Boyce wrote:
On 26/09/2023 23:13, Randy Dunlap wrote:
|| The snd-rpl-pci-acp6x driver only supports
|| vendor=0x1022, device=0x15e2, and PCI revision=0x62.

lspci -vv

01:00.1 Audiodevice: NVIDIA Corporation Device 10fa (rev a1)
       Subsystem: NVIDIA Corporation Device 1f82
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 80
       IOMMU group: 11
       Region 0: Memory at fc080000 (32-bit, non-prefetchable) [size=16K]
       Capabilities: [60] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
               Address: 0000000000000000  Data: 0000
       Capabilities: [78] Express (v2) Endpoint, MSI 00
               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W
               DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                       RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 256 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-                LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
                       ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
               LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s (downgraded), Width x16
                       TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+                         10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix-                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                        FRS- TPHComp- ExtTPHComp-
                        AtomicOpsCap: 32bit- 64bit- 128bitCAS-
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
                        AtomicOpsCtl: ReqEn-
               LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-                         EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
                        Retimer- 2Retimers- CrosslinkRes: unsupported
       Capabilities: [100 v2] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
               HeaderLog: 00000000 00000000 00000000 00000000
       Kernel driver in use: snd_hda_intel
       Kernel modules: snd_hda_intel

0b:00.6 Audiodevice: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD AudioController
       DeviceName: Realtek ALC897 Audio
       Subsystem: ASUSTeK Computer Inc. Device 87fb
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin C routed to IRQ 81
       IOMMU group: 24
       Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=32K]
       Capabilities: [48] Vendor Specific Information: Len=08 <?>
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [64] Express (v2) Endpoint, MSI 00
               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W
               DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                       RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 256 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-                LnkCap: Port #0, Speed 16GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
                       ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
               LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 16GT/s, Width x16
                       TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-                         10BitTagComp+ 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                        FRS- TPHComp- ExtTPHComp-
                        AtomicOpsCap: 32bit- 64bit- 128bitCAS-
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
                        AtomicOpsCtl: ReqEn-
               LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-                         EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
                        Retimer- 2Retimers- CrosslinkRes: unsupported
       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
               Address: 00000000fee00000  Data: 0000
       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
       Capabilities: [2a0 v1] Access Control Services
               ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
       Kernel driver in use: snd_hda_intel
       Kernel modules: snd_hda_intel

Sid, do you have some reason to believe that one of these devices should use the snd-rpl-pci-acp6x driver? I don't see that either one of them is the correct vendor/device ID pair for that driver, but I would prefer that someone who is
familiar with the driver & device jump in here...

Discovered this morning that there was a faulty plug to one of the external speakers.

Playback Devices in kmix  now show "Family 17h/19h HD Audio Controller Analog Stereo" and I have audio working with pipewire.

Regards

Sid.

--
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot
Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist
Microsoft Windows Free Zone - Linux used for all Computing Tasks




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux